Modify instances of the use of the word idempotence to be correct. (#18704)

Idempotence has a very specific meaning and it is generally not used correctly
in the manual. My attention was first drawn to this problem by the incorrect
definition in the glossary, but on further reading of the docs I found that
the problem occurred in a number of places.

Signed-off-by: mulhern <amulhern@redhat.com>

docsite/rst/dev_guide/developing_modules.rst

@@ -149,12 +149,11 @@ a lot shorter than this::
             if key == "time":
 
                 # now we'll affect the change.  Many modules
-                # will strive to be 'idempotent', meaning they
+                # will strive to be idempotent, generally
-                # will only make changes when the desired state
+                # by not performing any actions if the current
-                # expressed to the module does not match
+                # state is the same as the desired state.
-                # the current state.  Look at 'service'
+                # See 'service' or 'yum' in the main git tree
-                # or 'yum' in the main git tree for an example
+                # for an illustrative example.
-                # of how that might look.
 
                 rc = os.system("date -s \"%s\"" % value)
 

docsite/rst/developing_modules.rst

@@ -149,12 +149,11 @@ a lot shorter than this::
             if key == "time":
 
                 # now we'll affect the change.  Many modules
-                # will strive to be 'idempotent', meaning they
+                # will strive to be idempotent, generally
-                # will only make changes when the desired state
+                # by not performing any actions if the current
-                # expressed to the module does not match
+                # state is the same as the desired state.
-                # the current state.  Look at 'service'
+                # See 'service' or 'yum' in the main git tree
-                # or 'yum' in the main git tree for an example
+                # for an illustrative example.
-                # of how that might look.
 
                 rc = os.system("date -s \"%s\"" % value)
 

docsite/rst/glossary.rst

@@ -67,6 +67,18 @@ when a term comes up on the mailing list.
         Ansible's conditionals are powered by the 'when' statement, which are
         discussed in the :doc:`playbook documentation <playbooks>`.
 
+    Declarative
+        An approach to achieving a task that uses a description of the
+        final state rather than a description of the sequence of steps
+        necessary to achieve that state. For a real world example, a
+        declarative specification of a task would be: "put me in California".
+        Depending on your current location, the sequence of steps to get you to
+        California may vary, and if you are already in California, nothing
+        at all needs to be done. Ansible's Resources are declarative; it
+        figures out the steps needed to achieve the final state. It also lets
+        you know whether or not any steps needed to be taken to get to the
+        final state.
+
     Diff Mode
         A ``--diff`` flag can be passed to Ansible to show what changed on
         modules that support it. You can combine it with ``--check`` to get a
@@ -174,16 +186,9 @@ when a term comes up on the mailing list.
         data structures that can't be represented in the inventory file.
 
     Idempotency
-        The concept that change commands should only be applied when they need
+        An operation is idempotent if the result of performing it once is
-        to be applied, and that it is better to describe the desired state of
+        exactly the same as the result of performing it repeatedly without
-        a system than the process of how to get to that state.  As an analogy,
+        any intervening actions.
-        the path from North Carolina in the United States to California
-        involves driving a very long way West but if I were instead in
-        Anchorage, Alaska, driving a long way west is no longer the right way
-        to get to California.  Ansible's Resources like you to say "put me in
-        California" and then decide how to get there.  If you were already in
-        California, nothing needs to happen, and it will let you know it
-        didn't need to change anything.
 
     Includes
         The idea that :term:`playbook <playbooks>` files (which are nothing

docsite/rst/guide_cloudstack.rst

@@ -7,7 +7,7 @@ Introduction
 ````````````
 The purpose of this section is to explain how to put Ansible modules together to use Ansible in a CloudStack context. You will find more usage examples in the details section of each module.
 
-Ansible contains a number of extra modules for interacting with CloudStack based clouds. All modules support check mode and are designed to use idempotence and have been created, tested and are maintained by the community.
+Ansible contains a number of extra modules for interacting with CloudStack based clouds. All modules support check mode, are designed to be idempotent, have been created and tested, and are maintained by the community.
 
 .. note:: Some of the modules will require domain admin or root admin privileges.
 

docsite/rst/intro_adhoc.rst

@@ -108,10 +108,12 @@ the local shell doesn't eat a variable before it gets passed to Ansible.
 For example, using double rather than single quotes in the above example would
 evaluate the variable on the box you were on.
 
-So far we've been demoing simple command execution, but most Ansible modules usually do not work like
+So far we've been demoing simple command execution, but most Ansible modules are not simple imperative scripts. Instead, they use a declarative model,
-simple scripts. They make the remote system look like a state, and run the commands necessary to
+calculating and executing the actions required to reach a specified final state.
-get it there.  This is commonly referred to as 'idempotence', and is a core design goal of Ansible.
+Furthermore, they achieve a form of idempotence by checking the current state
-However, we also recognize that running arbitrary commands is equally important, so Ansible easily supports both.
+before they begin, and if the current state matches the specified final state,
+doing nothing.
+However, we also recognize that running arbitrary commands can be valuable, so Ansible easily supports both.
 
 .. _file_transfer:
 

docsite/rst/modules_intro.rst

@@ -35,8 +35,10 @@ Another way to pass arguments to a module is using yaml syntax also called 'comp
 All modules technically return JSON format data, though if you are using the command line or playbooks, you don't really need to know much about
 that.  If you're writing your own module, you care, and this means you do not have to write modules in any particular language -- you get to choose.
 
-Modules strive to be `idempotent`, meaning they will seek to avoid changes to the system unless a change needs to be made.  When using Ansible
+Modules should be idempotent, and should avoid making any changes if
-playbooks, these modules can trigger 'change events' in the form of notifying 'handlers' to run additional tasks.
+they detect that the current state matches the desired final state. When using
+Ansible playbooks, these modules can trigger 'change events' in the form of
+notifying 'handlers' to run additional tasks.
 
 Documentation for each module can be accessed from the command line with the ansible-doc tool::
 

docsite/rst/playbooks_intro.rst

@@ -246,11 +246,13 @@ taken out of the rotation for the entire playbook.  If things fail, simply corre
 The goal of each task is to execute a module, with very specific arguments.
 Variables, as mentioned above, can be used in arguments to modules.
 
-Modules are 'idempotent', meaning if you run them
+Modules should be idempotent, that is, running a module multiple times
-again, they will make only the changes they must in order to bring the
+in a sequence should have the same effect as running it just once. One
-system to the desired state.  This makes it very safe to rerun
+way to achieve idempotency is to have a module check whether its desired
-the same playbook multiple times.  They won't change things
+final state has already been achieved, and if that state has been achieved,
-unless they have to change things.
+to exit without performing any actions. If all the modules a playbook uses
+are idempotent, then the playbook itself is likely to be idempotent, so
+re-running the playbook should be safe.
 
 The **command** and **shell** modules will typically rerun the same command again,
 which is totally ok if the command is something like
@@ -259,7 +261,7 @@ be used to make these modules also idempotent.
 
 Every task should have a ``name``, which is included in the output from
 running the playbook.   This is human readable output, and so it is 
-useful to have provide good descriptions of each task step.  If the name
+useful to provide good descriptions of each task step.  If the name
 is not provided though, the string fed to 'action' will be used for
 output.
 
@@ -340,7 +342,7 @@ The old form continues to work in newer versions without any plan of deprecation
 Handlers: Running Operations On Change
 ``````````````````````````````````````
 
-As we've mentioned, modules are written to be 'idempotent' and can relay when
+As we've mentioned, modules should be idempotent and can relay when
 they have made a change on the remote system.   Playbooks recognize this and
 have a basic event system that can be used to respond to change.