* If the command input is dict from module
in that case the check to see if command is
end or `!` to exclude it from executing on remote
host is wrong. Fix the logic to check `end` and
`!` commands
* Refactor ios cliconf plugin and ios_config module
* Refactor ios cliconf plugin to support generic network_config module
* Refactor ios_config module to work with cliconf api's
* Enable command and response logging in cliconf pulgin
* cliconf api documentation
* Fix unit test and other minor changes
* Doc update
* Fix CI failure
* Add default flag related changes
* Minor changes
* redact input command logging by default
* Return messages generated from edit_config to module
* This does not seem to work that way
* Change test IP addresses to not conflict with device config
* HTTPAPI connection
* Punt run_commands to cliconf or httpapi
* Fake enable_mode on eapi
* Pull changes to nxos
* Move load_config to edit_config for future-preparedness
* Don't fail on lldp disabled
* Re-enable check_rc on nxos' run_commands
* Reorganize nxos httpapi plugin for compatibility
* draft docs for connection: httpapi
* restores docs for connection:local for eapi
* Add _remote_is_local to httpapi
* Modifying cnos-facts, cnos_command and cnos-config in line with the design followed in Ansible. Adding unit test cases for these modules. Added plugins to support them.
* Removing doc fragment conflicts with other modules
* Replacing show with display
* Initial commit
* Socket Timeout and dest file handler
* sftp handling
* module name change as per review
* multiple thread tmp file overwite problem
* Integration test suite for network_put
* add additional testcase for dest argument
* fix pylint/pep8/modules warnings
* add socket timeout for get_file
* network_get module
* pep8 issue on network_get
* Review comments
* Adding exos_command cli_conf module
* fixing documentation, indentation and metadata_version
* removing doc fragmentation and adding required import
* removing unnecessary code and including company name on short_description
* updating BOTMETA.yml with exos module information
* Remove raw byte-strings from cliconf plugins of supported platforms + edgeos
Remove uses of to_bytes, too
* Update CliConfBase docstring to reflect current position on byte strings
If format is passed as None to get_config api, wrong command is
genereted ie. `show running-configuration | None | section interface`.
Add format type in command only if format value is either not `text`
or `None`.
* Adding slx_command module and supporting module_utils.
This commit adds the slx_command module and tests as well as the
required slxos module_utils.
* Update copyright in header
* Adding missing module init
* Cleaning up shebangs/licensing.
* Incorporating feedback
Removing reference to `waitfor` alias in `slxos_command` module.
Adding `Extreme Networks` to `short_description` of `slxos_command` module.
* Adding cliconf tests
* Fixing 3.X tests
* Adding docstrings to test methods for slxos cliconf tests
* Adding slxos terminal tests
* Adding slxos module_utils tests
* Adding Extreme Networks team members to BOTMETA.yml
Fixes#37208
If check_mode is enabled instead of committing th config need to
discard all the chnages to cnadidate db
In case of cli to discard changes issue `rollback 0` command
and for netconf execute `discard-changes` rpc call
* Remove default admin_distance and fix the idempotence thereof
Fixes#33290
* Fix tests and use yaml anchors to shorten tests
* Add test for undefined admin_distance
* Read config from `show run` if `show ip static route` fails
* Restore flags to ios.get_config & use get_config where appropriate
This commit fixes up the get_config method to match the minimum method
signature as defined by the base class. Without this patch, the
get_config method calls will fail in some cirumstances.
send_command already performs the to_bytes safely on prompts (checking
for None). Without this check the literal 'None' became a subprompt trigger!
Fixes#35662
* Revert "commented out check tests (#35788)"
This reverts commit 3df2561405.
* `discard_changes()` now uses `exit discard`
instead of just `discard`. Also a slight tweak to avoid a second `exit` after
`exit discard`
* Fix over-byte
* Update ios tests to call `provider`
To continue to support testing `connection: local`
* Fix command dict handling in ios_user
* Clean up unit tests, too
* Handle multiple sub prompts for network_cli connection
Fixes#35349
* Check if the same prompt is repeated in consecutive window
if it is repeated it indicates there is problem with answer
provided
* In that case report error to user
* Fix CI failure
* Fixes#35349
* Add prompt_retry count to control max number of times
to expect the same prompt before it error's out
* Make required changes in ios and eos terminal plugin to handle
wrong enable password correctly and return proper error
message to user.
* Check if the same prompt is repeated in consecutive window
if it is repeated it indicates there is the problem with an answer
provided
* In that case report error to user
* Fix edit_config multiline commands on IOS
The current code for multiline commands in IOS is broken: If you
pass a dict containing a command, prompt and answer it is seen
later as unicode string, but if you do a json.loads it fails
as the keys/values are enclosed in single quotes but JSON requires
double quotes.
Fixes#23539
* Fix pep8
* Use ast literal_eval
It's safe to use, as it is just for types and wont execute arbitrary code.
Change cb1b705218 introduced the newline
parameter on network_cli plugin, but that was never introduced on cliconf.
This causes ios_user to break, since the newline value is never plumbed thru
to network_cli
* Fix persistent command timeout handling
We were using play context timeout on ansible-connect to set
the persistent command timeout handler. Thus, we were ignoring
the persistent_command_timeout setting.
Moreover, even by changing that on ansible-connection, were again
overriding it on cliconf send_command, since in a same process we can
just set a single alarm and cliconf send_command alarm setup is executed
after ansible-connection alarm setup.
* Remove alarm setting on cliconf send_command
The alarm is set regardless before it is executed by ansible-connection.
Setting an alarm again, overrides/disables the previous ones as a single
process can just have a single alarm set.
* Move the setting of persistent command timeout to network_cli
We do also use ansible-connection for connection local, so if a
user provides a timeout via provider that would be ignored if we
set the value on ansible-connection.
Moving that logic to network_cli plugin constructor makes both
connections to work.
* Remove debug statements
* Set the persistent command timeout on task_executor
We can't set the timeout on ansible-connection nor network_cli,
otherwise tasks using provider timeout won't work.
* Mellanox OS name change: MLNXOS changed to ONYX
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix alphabetical order of modules metadata
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* WIP Refactor EOS code to use cliconf
* Fix connection.get where sendonly is True
* Fix pylint issue
* Remove return from send_config and various exec_commands
Also, removed a few try/except, which are anyways handled in
Connection.
* Update task definitions for network_cli
* Add connection to debug messages
* Specify connection for prepare task
* pc won't be around for connection=network_cli
* Assorted Python 3 fixes
* Give default port if ansible_ssh_port missing
* delegate -> connection
* Extend error regex
Biao Liu
Ganesh Nalawade
Anil Kumar Muraleedharan
Trishna Guha
Nathaniel Case
Deepak Agrawal
Rafael Vencioneck
Matthew Stone
Peter Sprygada
bdowling
Sam Doran
Chad Norgan
Ricardo Carrillo Cruz
Kedar Kekan
Senthil Kumar Ganesan
Dhivyap
abirami-n
Samer Deeb