* Add intent arguments for ios_interface
* Intent argument support
* Integration test case for intent arguments
* Fix ci issue
* Add intent arguments for iosxr_interface
* Add intent check support for iosxr_interface
* Integration test for intent + configuration
* Fix ci failure
* ios implementation for net_interface
* ios_interface implementation
* ios_interface integration test
* net_interface integration test for ios and other refactor
* Update boilerplate and minor refactor
* Fixed Retrieving All IPv4 Addresses on L3 Interfaces
The ios_facts module retrieving the interface subnet, would only get the primary IPv4 address on the interface and would not capture all the secondary IPs (ones that I would be set by "ip address x.x.x.x x.x.x.x secondary").
This was tested and confirmed to work on a Cisco 6500 with IOS 15.1(2)SY6.
* Fixed whitespace and if statement issues for sanity.
* Fixed spacing because sanity.
* changed collection arg to argregate on 2.4 network modules
* replace users with aggregate in eos_user, junos_user, nxos_user
* added version_added to places where we replaced users with aggregate in the docs
* fix ios_static_route test
* update tests to reference aggregate instead of collection/users
Fix IOS TypeError
* if flags are None, then ' '.join(flags) fails
* fixed get_defaults_flag so that it returns a list, and ignores lines with white space
Fixes#26918
* adds more intelligent save logic and diff to network config modules
* adds sha1 property to NetworkConfig
* adds new argument save_when to argument_spec
* adds new argument diff_against to argument_spec
* adds new argument intended_config to argument_spec
* renames config argument to running_config with alias to config
* deprecates the use of the save argument
* before and after now work with src argument
* misc module clean
Modules updated
* nxos_config
* ios_config
* eos_config
Most notably this makes the save mechanism more intelligent for config
modules for devices that need to copy the ephemeral config to
non-volatile storage.
The diff_against argument allows the playbook task to control what the
device's running-config is diff'ed against. By default it will return
the diff of the startup-config.
* removes ios_config from pep8/legacy_files.txt
* extends the ignore lines argument to the module
* clean up CI errors
* add missing list brackets
* fixes typo
* fixes unit test cases
* remove last line break when returning config contents
* encode config string to bytes before hashing
* fix typo
* addresses feedback in PR
* update unit test cases
* Add junos_banner declartive module
* junos_banner implementation
* Integration test for junos_banner
* Integration test for net_banner (junos)
* Minor fixes
* Minor doc change
* Fixes#24251 save config only if it is changed
Save to startup configuration only when it is different
from running configuration.
* Fix unit test issue
* Make it easier to find network modules
Feedback has been it's difficult (via Google or directly) to find
modules as some people search for the company name vs product name,
therefore specify both.
* "IOS XR" (not "IOS-XR")
It's possible that if the module has a low-level failure, such as
"unable to open shell", or something else in the action plugin that
stdout and stdout_lines will not be returned.
Update the documentation to clarify this point.
If the banner is not set, the stdout of 'show configuration | begin banner <banner>'
returns empty string thus the re.search raises an exception.
Fixes#22216
When the ios_config module has 'defaults' param it runs in the device the command
'show running-config all' but 'all' may not be available in older devices.
This change makes introspection by using the help command and run 'full' in case
'all' is not available.
Fixes#22747
* Tidy up docs for network 2.3 modules
* Use suboptions
* Correct indentation
* more tidyup
* bulk updates
* more tidyup
* Bulk changes
* nxos_mtu is dead
* revert
* NXOS_mtu is dead, also better layout
* rebase
* rebase
Changes to the metadata format were approved here:
https://github.com/ansible/proposals/issues/54
* Update documentation to the new metadata format
* Changes to metadata-tool to account for new metadata
* Add GPL license header
* Add upgrade subcommand to upgrade metadata version
* Change default metadata to the new format
* Fix exclusion of non-modules from the metadata report
* Fix ansible-doc for new module metadata
* Exclude metadata version from ansible-doc output
* Fix website docs generation for the new metadata
* Update metadata schema in valiate-modules test
* Update the metadata in all modules to the new version
There as an invalid key in the command dict that would cause failure
using prompts. This changes the key from response to answer which is
what is expected by network_cli
In order to populate the total and free mem of an IOS device, we run
the 'show memory statistics' command.
The output shows something similar to:
Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)
Processor BEAE880 335215488 64044364 271171124 268918092 268463852
I/O 8DAE880 51380224 41880736 9499488 9461552 9352252
We need to just parse the line containing 'Processor' and get the first and third
number for total and free mem, instaed for first and second as the code wrongly
does.
* removes connection functions refactored into connection
* updates ComplexDict and ComplexList objects to use with AnsibleModule
* updates modules to add new argument to ComplexList & ComplexDict
When loading the params in the local action, the provider key was
inadvertently being loaded as well. This created the circular
reference. The load_provider() method will now check for the provider
key and skip it when encountered.
fixes#21399
* adds conversion to command dict into ios shared lib
* fixes hardware commands in ios_facts
* adds network_os value to play_context in ios action plugin
fixes#21190
* updates all ios modules to support persistent socket
* adds ios action plugin to connect to device
* adds exec_command() to ios shared module
* fixes ios_config and ios_template local action
* update all unit test cases
* adds base test module for ios module testing
* returns support for prompt/response over cli
* now sends native dict instead of str command
* fixes issue with run_commands() in ios to jsonify request
* updates unit test cases
* updates the ios_config module to use the network_cli plugin
* updates the local action plugin to derive from network
* add unit test cases for ios_config
* updates the deprecated ios_template module to use network_cli
* adds unit test cases for ios_template
* adds check for provider argument and displays warning message
stdout lines are now available when certain exceptions occur
(Ref ansible/ansible#18241)
Also noticed that to_lines was essentially handled in
lib/ansible/plugins/action/__init__.py -- only difference was
it didn't handle a list. to_lines() could be removed across
network modules now, but this commit is only for ios_command.
Also adds disconnect() to ios_command that was added
to ios_config in #5247
this fix will now handle loading a multiline banner on ios based
devices without hanging. It separates the processing of banners
from the remainder of the config
link #5318
The module will error if it tries to use a cli command that is not available
on a given platform. This fix will address that problem. If the cli
command is not available, then the command is silently discarded and the
facts that the command output is based on is not returned. Any failed
commands are provided in the module return under the failed_commands
key. This fix also updates the Examples docstring to make it consistent
with other ios_* modules
fixes#5444fixes#5372
* 'before' and 'after' are now only applied to 'lines'
* remove update argument
* update doc strings
* add path argument when performing config difference
When the configuration is compared and the results deserialized, the
dumps() function returns a string. This cohereces the return to a list
in case before and/or after needs to be applied
fixes 4707
IOS devices only support a single command output which is structured
text. This removes the ability to specify the command output format
when providing complex arguments to the commands
The CommandRunner will not allow duplicate commands to be added to the
command stack. This fix will now catch the exception and continue if
a duplicate command is attempting to be added to the runner instance.
* merge changes from ios shared module functions into ios_config.
* add src argument to provide path to config file
* add new choice to match used to ignore current running config
* add update argument with choices merge or check
* add backup argument to backup current running config to control host
* add defaults argument to control collection of config with or withoutdefaults
* add save argument to save current running config to startup config
* add state argument to control state of config file
* deprecated force argument, use match=none instead
* commands argument now accepts a dict arguments[1]
* waitfor has been renamed to wait_for with an alias to waitfor
* only show commands are allowd when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
[1] The commands argument will now accept a dict argument that can
specifiy the output format of the command. To specify a dict argument
use the form of { command: <str>, output: <str>, prompt: <str>,
response: <str> }. Command and output are required arguments. Output
accepts valid values text and json.
The module would raise a KeyError trying to find the save_config key
which is not present in the argument_spec. This was caused by the
check_args() function. Since the ios shared argument spec isn't used
the check_args function is not needed and has been removed.
This removes the get_module() factory function and directly creates
an instance of NetworkModule. This commit includes some minor clean
up to transition to the ios shared module for 2.2
* using check mode will now block all commands except show commands
* module will no longer allow config mode commands
* check args for unused values and issue warning
This refactors the ios_config module to use the network module added
in 2.2 to simplify common network functions
new features
* add src, dest arguments for working with config
* results now return flag if the config was saved or not
* adds append argument for updating the dest file (when dest is used)
This commit address a bug in the ios_config module when using the
match: strict argument. When the argument is used, the module will
compare the configuration block same as match: exact which is not the
intended behavior. This commit updates the behavior to propertly handle
the strict argument.
David Newswanger
Ganesh Nalawade
Trishna Guha
Tyler
techhelper1
Peter Sprygada
Ricardo Carrillo Cruz
John R Barker
Ken Celenza
Chris Alfonso
Toshio Kuratomi
Matt Martz
René Moser
Mike Rostermund
Matt Clay
mrLarbi
bdowling
Bill Nottingham
Nathaniel Case
Peter Sprygada
Andrew Gaffney
Alvaro Aleman
Nathaniel Case
Rob Phoenix
Michael Scherer
Johannes Meixner
Brian Coca
Justin Kennedy
Patrick Ogenstad
moyashiki
chouseknecht