IOS prepends a show running-config with lines that are not part of the
configuration, keeping the output from being an entirely valid configuration:
R1#show run
Building configuration...
Current configuration : 2045 bytes
...
In order to be able to use the config from ios_facts as-is, strip this
header.
* ios_facts: Fix LLDP gathering without neighbors
When LLDP is enabled but no neighbors are present, the following
structure is generated:
...
"ansible_net_neighbors": {
"null": [
{
"host": null,
"port": null
}
]
},
...
If we are not able to find any relevant LLDP information, bail out early
so cases like shown above are handled more gracefully.
* ios_facts: Remove trailing space in lineprotocol
Some Cisco devices (at least CSR1000V 16.6.4) add a space after the
line protocol. This causes the space to be present in the result of
fact gathering:
"ansible_net_interfaces": {
"GigabitEthernet2": {
...
"lineprotocol": "up ",
Be more clear about scanning the output to avoid this behaviour.
* ios_facts: Report file system space
Parse total and free space from dir output. For this, add a hash
filesystems_info containing the keys spacetotal_kb and spacefree_kb.
* ios_facts: Add unit test for file system space reporting
* ios_facts: Add integration test for file system space reporting
* Do not gather mem facts if command invalid
In some firmwares, 'show memory statistics' fail, thus
do not populate mem if we got a failure after running that command.
* Fix pep8
* Warn if got error when running 'sh memory statistics'
* Fix pep8
The return documentation for ios_facts used an inconsistent mix
of str and string to denote a string data type.
This patch modifies all to be "string".
* Revert model and serialnum to older version
* Add stacked versions of model and serialnum as separate facts
* Add unit test to check stacked output
* Alter model regex to address #34768
* Refactor common network shared and platform specific code into package (part-1)
As per proposal #76 refactor common network shared and platform specific
code into sub-package.
https://github.com/ansible/proposals/issues/76
* ansible.module_utils.network.common - command shared functions
* ansible.module_utils.network.{{ platform }} - where platform is platform specific shared functions
* Fix review comments
* Fix review comments
* Fixed Retrieving All IPv4 Addresses on L3 Interfaces
The ios_facts module retrieving the interface subnet, would only get the primary IPv4 address on the interface and would not capture all the secondary IPs (ones that I would be set by "ip address x.x.x.x x.x.x.x secondary").
This was tested and confirmed to work on a Cisco 6500 with IOS 15.1(2)SY6.
* Fixed whitespace and if statement issues for sanity.
* Fixed spacing because sanity.
* Make it easier to find network modules
Feedback has been it's difficult (via Google or directly) to find
modules as some people search for the company name vs product name,
therefore specify both.
* "IOS XR" (not "IOS-XR")
Changes to the metadata format were approved here:
https://github.com/ansible/proposals/issues/54
* Update documentation to the new metadata format
* Changes to metadata-tool to account for new metadata
* Add GPL license header
* Add upgrade subcommand to upgrade metadata version
* Change default metadata to the new format
* Fix exclusion of non-modules from the metadata report
* Fix ansible-doc for new module metadata
* Exclude metadata version from ansible-doc output
* Fix website docs generation for the new metadata
* Update metadata schema in valiate-modules test
* Update the metadata in all modules to the new version
In order to populate the total and free mem of an IOS device, we run
the 'show memory statistics' command.
The output shows something similar to:
Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)
Processor BEAE880 335215488 64044364 271171124 268918092 268463852
I/O 8DAE880 51380224 41880736 9499488 9461552 9352252
We need to just parse the line containing 'Processor' and get the first and third
number for total and free mem, instaed for first and second as the code wrongly
does.
* adds conversion to command dict into ios shared lib
* fixes hardware commands in ios_facts
* adds network_os value to play_context in ios action plugin
fixes#21190
* updates all ios modules to support persistent socket
* adds ios action plugin to connect to device
* adds exec_command() to ios shared module
* fixes ios_config and ios_template local action
* update all unit test cases
* adds base test module for ios module testing
The module will error if it tries to use a cli command that is not available
on a given platform. This fix will address that problem. If the cli
command is not available, then the command is silently discarded and the
facts that the command output is based on is not returned. Any failed
commands are provided in the module return under the failed_commands
key. This fix also updates the Examples docstring to make it consistent
with other ios_* modules
fixes#5444fixes#5372
The CommandRunner will not allow duplicate commands to be added to the
command stack. This fix will now catch the exception and continue if
a duplicate command is attempting to be added to the runner instance.
Trishna Guha
Dag Wieers
Paul Neumann
Sandra McCann
Matt Clay
Sebastien Pouplin
epicanthal
Nathaniel Case
Ricardo Carrillo Cruz
Tyler Bigler
Eric Brown
kalimsshar
John Barker
Ganesh Nalawade
Jonathan Karras
Toshio Kuratomi
techhelper1
Matt Martz
Peter Sprygada
Peter Sprygada
Rob Phoenix