* Add support for global IGMP configuration on onyx switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add support for global IGMP configuration on onyx switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Changing Lenovo Inc to Lenovo and update License file to be consistent.
* Changing cnos_vlan from paramiko to persistence connection of Ansible. Also talking care of CLI changes in CNOS commands with backward compatibility.
* Fixing Validation issues
* Trailing lines removal
* Review comments of Gundalow are getting addressed. He mentioned only at one place for cnos.py. But I have covered the entire file.
* Changes to incorporate Review comments from Qalthos
* Removing configure terminal command from module code
* Aligning with change in run_cnos_commands method changes
* Editing cliconf for latest CNOS CLIs
* construct_path() now supports custom keys
- Allows for much more flexible test substitution
- Implemented functionality in meraki_vlan for test case
* Fix comments for PEP8
* Enable get_net() to download nets if data isn't provided
- Currently, get_net() requires data to be passed to it
- PR enables get_net() to download all networks if data isn't passed
- Slightly simpler code
- Best practice is to download nets early in execution
* Apply fixes related to get_net()
* Removed extra code from the rebase
* Enabled support for configuration template configuration
- get_nets() now pulls down templates and networks
- A few changes in VLAN and network to operate as a POC
* Ansibot changes
- Fix undefined variable
- Document net_id in meraki_vlan
* Fix indentation
* Update eos cliconf plugin methods
* Refactor eos cliconf plugin
* Changes in eos module_utils as per cliconf plugin refactor
* Fix unit test and sanity failures
* Fix review comment
- Module utility now has orgs, nets, org_id, and net_id properties
- get_nets and get_orgs sets nets and orgs properties respectively
- Allows for storage of this data in the module. org_id and net_id aren’t set as I cannot guarantee that’s always desired.
* Added support for checking HTTP response codes
- All request calls now check for response code before responding
- If the response code isn't what it should be, it fails or returns nothing
- Breaking this into multiple PRs to make backporting easier
- Using status property in Meraki module utility which has the code
* Change logic of HTTP checks so success is default
- Previously all data between both data structures was compared
- Results in situations where updates are done when not needed
- Changes to single pass so only data in payload is compared
* request() has improved error reporting
- 5xx errors show same as before
- 3xx and 4xx errors show error body
* Print body for errors greater than 300, but less than 500
* Remove trailing whitespace
Avoid the _undefined name_ and mirror lines 389 and 459 by catching the raised exception in the variable __exc__ so it can be reported on the following line.
flake8 testing of https://github.com/ansible/ansible on Python 3.6.3
$ __flake8 . --count --select=E901,E999,F821,F822,F823 --show-source --statistics__
```
./lib/ansible/module_utils/network/iosxr/iosxr.py:414:42: F821 undefined name 'exc'
module.fail_json(msg=to_text(exc))
^
```
* Add run_commands api for ios and vyos cliconf plugin
* Add run_commands api to ios and vyos cliconf plugin
* Refactor ios and vyos module_utils to check return code
in run_commands
* Fix Ci failures
* Issue #39860: Add 'not_contains' method to parsing.py
* Issue #30860 Adds self.negate to Conditional class in lib/ansible/module_utils/network/common/parsing.py
* Issue #39860 Fix singleton-comparison issue per sanity tests
* Issue #39860 'test/integration/targets/nxos_command/tests/cli/not_comparison_operator.yaml' integration test
* Issue #39860 Add unit tests to '../../test/units/module_utils/network/common/test_parsing.py'
* Issue #39860 Fix singleton comparison issue
* Fix E302 expected 2 blank lines, found 1
* Issue #39860 Add license header to unit tests
* Issue #39860 Move integration test to 'test/integration/targets/nxos_command/tests/common/'; remove unnecessary comment from unit test
* Issue #39860 remove unnecessary comment from unit test
* Add diff capability in vyos edit_config
Fetch onbox diff within edit_config cliconf
plugin and return it in response
* Remove diff returned from ios edit_config
* Fix CI failure
* More CI fixes
* Fix ios and vyos cliconf edit_config return type
Modify cliconf edit_config api to return a json string with
diff and response received from remote host for ios and vyos.
* Doc change
* vyos and ios cliconf plugin refactor
* Refactor vyos cliconf plugin
* Change vyos module_utils and vyos_config as per refactor
* Minor changes in ios cliconf plugin
* Fix unit test failure
* Fix sanity issues
* Add get_diff to rpc list
* Implement configuration template management
- Queries or removes templates
- Can bind or unbind templates to networks
- Module is idempotent only for binding and unbinding
- Meraki does not allow template creation via API
- Integration test is tedious b/c previous bullet point
- Fixed bug in construct_path() so it won't set self.function
* PEP8 changes
* Re-enable some integration tests, use variables, and fix broken code
* Changed request() to run json.loads() instead of module doing it
- Removed json.loads() from modules
- Removed some unreliable integration tests
- Removed self.function setting in construct_path()
-
* PEP8 changes
* Remove debug line for push
* Refactor ios cliconf plugin and ios_config module
* Refactor ios cliconf plugin to support generic network_config module
* Refactor ios_config module to work with cliconf api's
* Enable command and response logging in cliconf pulgin
* cliconf api documentation
* Fix unit test and other minor changes
* Doc update
* Fix CI failure
* Add default flag related changes
* Minor changes
* redact input command logging by default
* Initial commit for meraki_admin module
* Initial commit for meraki_snmp module
* Update code to be operational for SNMP settings
- Add optional_ignore value to is_update_required for one-time fields
- Write documentation
- Perform checks and execute changes
* Minor fixes and test improvements
- Fix some documentation errors
- Implement and test for idempotency
* Removed meraki_admin which shouldn't be there, ansibot changes
* Rename params to be lower case
- Updated integration tests
- Changed CamelCase to lowercase and underscore
* Code cleanup changes based on comments from Dag.
* New ansible module netconf_rpc
* add integration test for module netconf_rpc
* pep8/meta-data corrections
* usage of jxmlease for all XML processing
separation of attributes "rpc" and "content"
* removed unused imports
improved error handling
* fixed pep8
* usage of ast.literal_eval instead of eval
added description to SROS integration test for cases commented out
* mismatch type between function arguments
* add testcase for prompt
* yamllint issues
* remove overwriting response in case of connectionError exception
* remove import of ConnectionError as it is not required
* Return messages generated from edit_config to module
* This does not seem to work that way
* Change test IP addresses to not conflict with device config
* HTTPAPI connection
* Punt run_commands to cliconf or httpapi
* Fake enable_mode on eapi
* Pull changes to nxos
* Move load_config to edit_config for future-preparedness
* Don't fail on lldp disabled
* Re-enable check_rc on nxos' run_commands
* Reorganize nxos httpapi plugin for compatibility
* draft docs for connection: httpapi
* restores docs for connection:local for eapi
* Add _remote_is_local to httpapi
* Modifying cnos-facts, cnos_command and cnos-config in line with the design followed in Ansible. Adding unit test cases for these modules. Added plugins to support them.
* Removing doc fragment conflicts with other modules
* Replacing show with display
* New module for CRUD functionality of networks in a Meraki environment
- Relatively full integration test suite
- More functions to come
* Fix indent for PEP8.
- Look into why this didn't show on a local PEP8 test
* Dag requested changes.
- Removed a section in get_net as its backend isn't implemented
- Documentation modifications
* Update nios.py
* Update nios.py
* Update nios.py
* nios lookup errors out when there are no results #37970 Open
Indentation failure issue resolved
* Returning empty list instead of None
In case of no results, res will be returned as an empty list instead of None (implementing ganeshrn comment)
* infoblox ipv6 support changes
* infoblox ipv6 support changes
* for fixing pep8 errors
* moving ipaddr check to utils
* adding ipv6addr check
* increasing space to resolve pep8 error
* modified the playbook examples to valid ones
* Update nios_network.py
This PR includes:
- Fixes to the majority of module validation issues
(deliberate inconsistencies between docs and arg_spec)
- Removal of deprecated parameters 'method' and 'protocols'
- A few typos in the documentation
There are still some left-over validation errors, some are deliberate
(like doc strings as default to indicate ranges, etc.)
Issue : NameError: global name ‘cnos_devicerules’ is not defined. while running cnos modules.
Device Rule file validates the range and type of data going into each CLI based on device type it is executed against.
This has to be backported to 2.5
Nathaniel Case
Tim Rupp
Samer Deeb
Anil Kumar Muraleedharan
Kevin Breit
Trishna Guha
Ganesh Nalawade
cclauss
Eitan Akman
James Mighion
James Simpson
Biao Liu
Sumit Jaiswal
wiso
Deepak Agrawal
Tyler Bigler
Ricardo Carrillo Cruz
Dag Wieers