* Changing Lenovo Inc to Lenovo and update License file to be consistent.
* Changing cnos_vlan from paramiko to persistence connection of Ansible. Also talking care of CLI changes in CNOS commands with backward compatibility.
* Fixing Validation issues
* Trailing lines removal
* Review comments of Gundalow are getting addressed. He mentioned only at one place for cnos.py. But I have covered the entire file.
* Changes to incorporate Review comments from Qalthos
* Removing configure terminal command from module code
* Aligning with change in run_cnos_commands method changes
* Editing cliconf for latest CNOS CLIs
* construct_path() now supports custom keys
- Allows for much more flexible test substitution
- Implemented functionality in meraki_vlan for test case
* Fix comments for PEP8
* Enable get_net() to download nets if data isn't provided
- Currently, get_net() requires data to be passed to it
- PR enables get_net() to download all networks if data isn't passed
- Slightly simpler code
- Best practice is to download nets early in execution
* Apply fixes related to get_net()
* Removed extra code from the rebase
* Enabled support for configuration template configuration
- get_nets() now pulls down templates and networks
- A few changes in VLAN and network to operate as a POC
* Ansibot changes
- Fix undefined variable
- Document net_id in meraki_vlan
* Fix indentation
* Update eos cliconf plugin methods
* Refactor eos cliconf plugin
* Changes in eos module_utils as per cliconf plugin refactor
* Fix unit test and sanity failures
* Fix review comment
- Module utility now has orgs, nets, org_id, and net_id properties
- get_nets and get_orgs sets nets and orgs properties respectively
- Allows for storage of this data in the module. org_id and net_id aren’t set as I cannot guarantee that’s always desired.
* Added support for checking HTTP response codes
- All request calls now check for response code before responding
- If the response code isn't what it should be, it fails or returns nothing
- Breaking this into multiple PRs to make backporting easier
- Using status property in Meraki module utility which has the code
* Change logic of HTTP checks so success is default
- Previously all data between both data structures was compared
- Results in situations where updates are done when not needed
- Changes to single pass so only data in payload is compared
* request() has improved error reporting
- 5xx errors show same as before
- 3xx and 4xx errors show error body
* Print body for errors greater than 300, but less than 500
* Remove trailing whitespace
Avoid the _undefined name_ and mirror lines 389 and 459 by catching the raised exception in the variable __exc__ so it can be reported on the following line.
flake8 testing of https://github.com/ansible/ansible on Python 3.6.3
$ __flake8 . --count --select=E901,E999,F821,F822,F823 --show-source --statistics__
```
./lib/ansible/module_utils/network/iosxr/iosxr.py:414:42: F821 undefined name 'exc'
module.fail_json(msg=to_text(exc))
^
```
* Add run_commands api for ios and vyos cliconf plugin
* Add run_commands api to ios and vyos cliconf plugin
* Refactor ios and vyos module_utils to check return code
in run_commands
* Fix Ci failures
* Issue #39860: Add 'not_contains' method to parsing.py
* Issue #30860 Adds self.negate to Conditional class in lib/ansible/module_utils/network/common/parsing.py
* Issue #39860 Fix singleton-comparison issue per sanity tests
* Issue #39860 'test/integration/targets/nxos_command/tests/cli/not_comparison_operator.yaml' integration test
* Issue #39860 Add unit tests to '../../test/units/module_utils/network/common/test_parsing.py'
* Issue #39860 Fix singleton comparison issue
* Fix E302 expected 2 blank lines, found 1
* Issue #39860 Add license header to unit tests
* Issue #39860 Move integration test to 'test/integration/targets/nxos_command/tests/common/'; remove unnecessary comment from unit test
* Issue #39860 remove unnecessary comment from unit test
* Add diff capability in vyos edit_config
Fetch onbox diff within edit_config cliconf
plugin and return it in response
* Remove diff returned from ios edit_config
* Fix CI failure
* More CI fixes
* Fix ios and vyos cliconf edit_config return type
Modify cliconf edit_config api to return a json string with
diff and response received from remote host for ios and vyos.
* Doc change
* vyos and ios cliconf plugin refactor
* Refactor vyos cliconf plugin
* Change vyos module_utils and vyos_config as per refactor
* Minor changes in ios cliconf plugin
* Fix unit test failure
* Fix sanity issues
* Add get_diff to rpc list
* Implement configuration template management
- Queries or removes templates
- Can bind or unbind templates to networks
- Module is idempotent only for binding and unbinding
- Meraki does not allow template creation via API
- Integration test is tedious b/c previous bullet point
- Fixed bug in construct_path() so it won't set self.function
* PEP8 changes
* Re-enable some integration tests, use variables, and fix broken code
* Changed request() to run json.loads() instead of module doing it
- Removed json.loads() from modules
- Removed some unreliable integration tests
- Removed self.function setting in construct_path()
-
* PEP8 changes
* Remove debug line for push
* Refactor ios cliconf plugin and ios_config module
* Refactor ios cliconf plugin to support generic network_config module
* Refactor ios_config module to work with cliconf api's
* Enable command and response logging in cliconf pulgin
* cliconf api documentation
* Fix unit test and other minor changes
* Doc update
* Fix CI failure
* Add default flag related changes
* Minor changes
* redact input command logging by default
* Initial commit for meraki_admin module
* Initial commit for meraki_snmp module
* Update code to be operational for SNMP settings
- Add optional_ignore value to is_update_required for one-time fields
- Write documentation
- Perform checks and execute changes
* Minor fixes and test improvements
- Fix some documentation errors
- Implement and test for idempotency
* Removed meraki_admin which shouldn't be there, ansibot changes
* Rename params to be lower case
- Updated integration tests
- Changed CamelCase to lowercase and underscore
* Code cleanup changes based on comments from Dag.
* New ansible module netconf_rpc
* add integration test for module netconf_rpc
* pep8/meta-data corrections
* usage of jxmlease for all XML processing
separation of attributes "rpc" and "content"
* removed unused imports
improved error handling
* fixed pep8
* usage of ast.literal_eval instead of eval
added description to SROS integration test for cases commented out
* mismatch type between function arguments
* add testcase for prompt
* yamllint issues
* remove overwriting response in case of connectionError exception
* remove import of ConnectionError as it is not required
* Return messages generated from edit_config to module
* This does not seem to work that way
* Change test IP addresses to not conflict with device config
* HTTPAPI connection
* Punt run_commands to cliconf or httpapi
* Fake enable_mode on eapi
* Pull changes to nxos
* Move load_config to edit_config for future-preparedness
* Don't fail on lldp disabled
* Re-enable check_rc on nxos' run_commands
* Reorganize nxos httpapi plugin for compatibility
* draft docs for connection: httpapi
* restores docs for connection:local for eapi
* Add _remote_is_local to httpapi
* Modifying cnos-facts, cnos_command and cnos-config in line with the design followed in Ansible. Adding unit test cases for these modules. Added plugins to support them.
* Removing doc fragment conflicts with other modules
* Replacing show with display
* New module for CRUD functionality of networks in a Meraki environment
- Relatively full integration test suite
- More functions to come
* Fix indent for PEP8.
- Look into why this didn't show on a local PEP8 test
* Dag requested changes.
- Removed a section in get_net as its backend isn't implemented
- Documentation modifications
* Update nios.py
* Update nios.py
* Update nios.py
* nios lookup errors out when there are no results #37970 Open
Indentation failure issue resolved
* Returning empty list instead of None
In case of no results, res will be returned as an empty list instead of None (implementing ganeshrn comment)
* infoblox ipv6 support changes
* infoblox ipv6 support changes
* for fixing pep8 errors
* moving ipaddr check to utils
* adding ipv6addr check
* increasing space to resolve pep8 error
* modified the playbook examples to valid ones
* Update nios_network.py
This PR includes:
- Fixes to the majority of module validation issues
(deliberate inconsistencies between docs and arg_spec)
- Removal of deprecated parameters 'method' and 'protocols'
- A few typos in the documentation
There are still some left-over validation errors, some are deliberate
(like doc strings as default to indicate ranges, etc.)
Issue : NameError: global name ‘cnos_devicerules’ is not defined. while running cnos modules.
Device Rule file validates the range and type of data going into each CLI based on device type it is executed against.
This has to be backported to 2.5
* Initial commit
Query an organization within Meraki. No support is in place for managing
or creating yet
* Change output_level method and make the state parameter required.
* Implemented listing all organizations
- Updated documentation
- Parse results and return all organizations
- Parse results and return specified organization
* Framework for creating an organization
- Documentation example for organization creation
- Framework exists for creating organizations, pending PR 36809
- Created functions for HTTP calls
- Renamed from dashboard.meraki.com to api.meraki.com
- Added required_if for state
* Remove absent state
- Meraki API does not support deleting an organization so absent is removed
- Updated documentation to call it state instead of status
* Small change to documentation
* Support all parameters associated to organization
- Added all parameters needed for all organization actions.
- None of the added ones work at this time.
- Added documentation for clone.
* Integration test for meraki_organization module
* Rename module to meraki for porting to module utility
* Meraki documentation fragment
- Created initial documentation fragment for Meraki modules
* Add meraki module utility to branch. Formerly was on a separate branch.
* CRU support for Meraki organization module
* CRU is supported for Meraki organizations
* There is no DELETE function for organizations in the API
* This code is very messy and needs cleanup
* Create and Update actions don't show status as updated, must fix
* Added Meraki module utility to module utility documentation list
* Added support for organization cloning
* Renamed use_ssl to use_https
* Removed define_method()
* Removed is_org()
* Added is_org_valid() which does all org sanity checks
* Fixes for ansibot
- Changed default of use_proxy from true to false
- Removed some commented out code
- Updated documentation
* Changes for ansibot
- Removed requirement for state parameter. I may readd this.
- Updated formatting
diff --git a/lib/ansible/module_utils/network/meraki/meraki.py b/lib/ansible/module_utils/network/meraki/meraki.py
index 3acd3d1038..395ac7c4b4 100644
--- a/lib/ansible/module_utils/network/meraki/meraki.py
+++ b/lib/ansible/module_utils/network/meraki/meraki.py
@@ -42,7 +42,7 @@ def meraki_argument_spec():
return dict(auth_key=dict(type='str', no_log=True, fallback=(env_fallback, ['MERAKI_KEY'])),
host=dict(type='str', default='api.meraki.com'),
name=dict(type='str'),
- state=dict(type='str', choices=['present', 'absent', 'query'], required=True),
+ state=dict(type='str', choices=['present', 'absent', 'query']),
use_proxy=dict(type='bool', default=False),
use_https=dict(type='bool', default=True),
validate_certs=dict(type='bool', default=True),
diff --git a/lib/ansible/modules/network/meraki/meraki_organization.py b/lib/ansible/modules/network/meraki/meraki_organization.py
index 923d969366..3789be91d6 100644
--- a/lib/ansible/modules/network/meraki/meraki_organization.py
+++ b/lib/ansible/modules/network/meraki/meraki_organization.py
@@ -20,11 +20,9 @@ short_description: Manage organizations in the Meraki cloud
version_added: "2.6"
description:
- Allows for creation, management, and visibility into organizations within Meraki
-
notes:
- More information about the Meraki API can be found at U(https://dashboard.meraki.com/api_docs).
- Some of the options are likely only used for developers within Meraki
-
options:
name:
description:
@@ -32,21 +30,18 @@ options:
- If C(clone) is specified, C(name) is the name of the new organization.
state:
description:
- - Create or query organizations
- choices: ['query', 'present']
+ - Create or modify an organization
+ choices: ['present', 'query']
clone:
description:
- Organization to clone to a new organization.
- type: string
org_name:
description:
- Name of organization.
- Used when C(name) should refer to another object.
- type: string
org_id:
description:
- ID of organization
-
author:
- Kevin Breit (@kbreit)
extends_documentation_fragment: meraki
@@ -86,7 +81,6 @@ RETURN = '''
response:
description: Data returned from Meraki dashboard.
type: dict
- state: query
returned: info
'''
@@ -103,6 +97,7 @@ def main():
argument_spec = meraki_argument_spec()
argument_spec.update(clone=dict(type='str'),
+ state=dict(type='str', choices=['present', 'query']),
)
@@ -125,11 +120,9 @@ def main():
meraki.function = 'organizations'
meraki.params['follow_redirects'] = 'all'
- meraki.required_if=[
- ['state', 'present', ['name']],
- ['clone', ['name']],
- # ['vpn_PublicIP', ['name']],
- ]
+ meraki.required_if = [['state', 'present', ['name']],
+ ['clone', ['name']],
+ ]
create_urls = {'organizations': '/organizations',
}
@@ -162,23 +155,16 @@ def main():
-
- # method = None
- # org_id = None
-
-
- # meraki.fail_json(msg=meraki.is_org_valid(meraki.get_orgs(), org_name='AnsibleTestOrg'))
-
if meraki.params['state'] == 'query':
- if meraki.params['name'] is None: # Query all organizations, no matter what
- orgs = meraki.get_orgs()
- meraki.result['organization'] = orgs
- elif meraki.params['name'] is not None: # Query by organization name
- module.warn('All matching organizations will be returned, even if there are duplicate named organizations')
- orgs = meraki.get_orgs()
- for o in orgs:
- if o['name'] == meraki.params['name']:
- meraki.result['organization'] = o
+ if meraki.params['name'] is None: # Query all organizations, no matter what
+ orgs = meraki.get_orgs()
+ meraki.result['organization'] = orgs
+ elif meraki.params['name'] is not None: # Query by organization name
+ module.warn('All matching organizations will be returned, even if there are duplicate named organizations')
+ orgs = meraki.get_orgs()
+ for o in orgs:
+ if o['name'] == meraki.params['name']:
+ meraki.result['organization'] = o
elif meraki.params['state'] == 'present':
if meraki.params['clone'] is not None: # Cloning
payload = {'name': meraki.params['name']}
@@ -193,7 +179,10 @@ def main():
payload = {'name': meraki.params['name'],
'id': meraki.params['org_id'],
}
- meraki.result['response'] = json.loads(meraki.request(meraki.construct_path('update', org_id=meraki.params['org_id']), payload=json.dumps(payload), method='PUT'))
+ meraki.result['response'] = json.loads(meraki.request(meraki.construct_path('update',
+ org_id=meraki.params['org_id']),
+ payload=json.dumps(payload),
+ method='PUT'))
diff --git a/lib/ansible/utils/module_docs_fragments/meraki.py b/lib/ansible/utils/module_docs_fragments/meraki.py
index e268d02e68..3569d83b99 100644
--- a/lib/ansible/utils/module_docs_fragments/meraki.py
+++ b/lib/ansible/utils/module_docs_fragments/meraki.py
@@ -35,6 +35,7 @@ options:
description:
- Set amount of debug output during module execution
choices: ['normal', 'debug']
+ default: 'normal'
timeout:
description:
- Time to timeout for HTTP requests.
diff --git a/test/integration/targets/meraki_organization/aliases b/test/integration/targets/meraki_organization/aliases
new file mode 100644
index 0000000000..ad7ccf7ada
--- /dev/null
+++ b/test/integration/targets/meraki_organization/aliases
@@ -0,0 +1 @@
+unsupported
* Formatting fix
* Minor updates due to testing
- Made state required again
- Improved formatting for happier PEP8
- request() now sets instance method
* Fix reporting of the result
* Enhance idempotency checks
- Remove merging functionality as the proposed should be used
- Do check and reverse check to look for differences
* Rewrote and added additional integration tests. This isn't done.
* Updated is_update_required method:
- Original and proposed data is passed to method
- Added ignored_keys list so it can be skipped if needed
* Changes per comments from dag
- Optionally assign function on class instantiation
- URLs now have {} for substitution method
- Move auth_key check to module utility
- Remove is_new and get_existing
- Minor changes to documentation
* Enhancements for future modules and organization
- Rewrote construct_path method for simplicity
- Increased support for network functionality to be committed
* Changes based on Dag feedback and to debug problems
* Minor fixes for validitation testing
* Small changes for dag and Ansibot
- Changed how auth_key is processed
- Removed some commented lines
- Updated documentation fragment, but that may get reverted
* Remove blank line and comment
* Improvements for testing and code simplification
- Added network integration tests
- Modified error handling in request()
- More testing to come on this
- Rewrote construct_path again. Very simple now.
* Remove trailing whitespace
* Small changes based on dag's response
* Removed certain sections from exit_json and fail_json as they're old
* Adding exos_command cli_conf module
* fixing documentation, indentation and metadata_version
* removing doc fragmentation and adding required import
* removing unnecessary code and including company name on short_description
* updating BOTMETA.yml with exos module information
* Adding slxos_config module and supporing util functions.
* Adding slxos module_utils load_config test
* Adding slxos_config module tests
* Removing unneeded required false statements from slxos_config module
* Removing version_aded from slxos_config module
* Removing force and save from slxos config module
* Removing save test
* Adding slx_command module and supporting module_utils.
This commit adds the slx_command module and tests as well as the
required slxos module_utils.
* Update copyright in header
* Adding missing module init
* Cleaning up shebangs/licensing.
* Incorporating feedback
Removing reference to `waitfor` alias in `slxos_command` module.
Adding `Extreme Networks` to `short_description` of `slxos_command` module.
* Adding cliconf tests
* Fixing 3.X tests
* Adding docstrings to test methods for slxos cliconf tests
* Adding slxos terminal tests
* Adding slxos module_utils tests
* Adding Extreme Networks team members to BOTMETA.yml
Fixes#37208
If check_mode is enabled instead of committing th config need to
discard all the chnages to cnadidate db
In case of cli to discard changes issue `rollback 0` command
and for netconf execute `discard-changes` rpc call
NSO verify did not handle leaf-list value verification in 4.5 and
later due to changes made for configuration writing made.
map prefix for identityref types in verification.
NSO operations can take much longer than 10 seconds as they operate on
real network equipment, set default timeout to 5 minutes and allow for
user override.
* eos can not check config without config session support
* add testcase for check_mode without config session
* fix eos eapi to read use_session env var
Fixes#36979
If `abort` is not issued in the top level session prompt
the existing session goes to pending state.
The fix is to come out of config mode by issuing `end` command
and again to same config session and execute `abort` which
`abort` is issued at the top level session prompt.
* Remove default admin_distance and fix the idempotence thereof
Fixes#33290
* Fix tests and use yaml anchors to shorten tests
* Add test for undefined admin_distance
* Read config from `show run` if `show ip static route` fails
* Restore flags to ios.get_config & use get_config where appropriate
False assumption that values can not have cyclic dependencies. Fix by
removing dependency on self and look for cycles, if found remove
dependency to get a partial sort done.
Fix issues in ValueBuilder used in nso_config and nso_verify so that it
can handle leaf-list in NSO 4.5 and detect identityref types from
unions.
Fail gracefully if a type is not found.
* aci_spvpg: Various fixes to integration tests/modules
This PR includes:
- A fix in module_utils aci.py
- Various fixes in integration tests
* Fix typo
This PR includes:
- A fix for a recently introduced issue wrt. error handling
- Added integration tests for provoked errors
- Influence standard return values using aci library for aci_rest
- Add proxy support documentation
- Documentation update related to #34175
When ACI modules are being used for querying MOs, we should not return
the previous state, as there is no previous state, there's only the
current state.
This impacts a lot of tests that were used to testing the current state
as 'previous'.
Since we pass information directly to ACI, we sometimes get error messages back to the user that require some additional information or context.
This PR includes:
- Changes to the default error output so the error is easier to find
when searching in e.g. Google
- 3 specific error messages that we have encountered and has confused
our users before
* Revert "commented out check tests (#35788)"
This reverts commit 3df2561405.
* `discard_changes()` now uses `exit discard`
instead of just `discard`. Also a slight tweak to avoid a second `exit` after
`exit discard`
This PR includes:
- Fixes related to the recent merge of #31637 and #34537
- A generic fix for a reference for assignment issue
- Fixes to aci.boolean() in order to catch exception
This PR includes:
- payload output on failure, when requested
- add additional kwargs to aci.exit_json()
We may want to enable some of this debug output by default on failure ?
This patch fixes repeated attempts that the module would make to
re-create an API object. The change stores a copy for later lookup
instead. This prevents uncontrolled tokens from being created.
* ACI: Change result output as discussed
* Update all modules to use new aci.exit_json()
* Update output_level spec and docs
* Fix integration tests
* Small PEP8 fix
* Asorted fixes to tests and aci_rest
* More test fixes and support for ANSIBLE_DEBUG
* Fix another PEP8 issues
* Move response handling inside ACI module
* Reform of ACI error handling and error output
* Diff multiline json output
* Fix a few more tests
* Revert aci_bd tests
* Small correction
* UI change: existing->current, original->previous
* UI change: config->sent
* Update all modules with RETURN values
* Fix a few more tests
* Improve docstring and add 'raw' return value
* Fix thinko
* Fix sanity/pep8 issues
* Rewrite unit tests to comply with new design
* ACI: Implement aci.boolean() to return an ACI boolean
A boolean value in ACI is not always standardized to yes/no.
Sometimes we have active/inactive, or enabled/disabled
Whereas the interface we want is a true YAML boolean.
We did not modify enabled/disabled values at this time.
I first want to determine if this implementation is acceptable.
* Support enabled/disabled as well, with deprecation messages
* Fix typo
* Fix PEP8 issue
* Ensure the aci object exists before using it
* Add comment to ensure this gets fixed in v2.9
* Fix typo
* aci_aaa_user: Manage AAA users on ACI fabrics
* Fix module documentation
* Ensure we allow to not set accountStatus and expires
* Added aaa_password_lifetime and aaa_password_update_required support
* Improvements to integration tests in light of issue 35544
* Fix ACI ISO 8601 formatted string
* Add HAS_DATEUTIL
* Adding new code for new module and new module_utils with the pip pyfmg package
* Changed login and logout functionality and renamed mod_utils file as well as cleaned up PEP8 syntax
* Removing extra Ansible parameters and fixing more syntax issues
* Fixing more syntax issues and comparing against previous FTNT script module
* Changing import location to pass syntax checks
* Fixing pylint errors
* Removing test files
* Add unit tests and enabling a login session check within main in order to throw error if network connection exception
* Fixing syntax issues for adding unit tests
* Changing case for pip package requirements
* adding comments
* adding version restriction on pip package for testing
* adding version restriction on pip package for testing
* More comments
* Fixing documentation errors and add the ability to skip a test if it isn't present
* Fixing Pep8 error with whitespace (tab) in the row
* * Changes to enable network_cli and netconf on modules.
* limits connection local for single TC per playbook.
* * adds a note on why only 1 TC is executed with connection: local
* compare arg+aliases between docs and argument_spec
* Add some special handling for the network modules provider options that also appear in the top level arg spec
* Fix error code for bigip_hostname
* Address merge conflicts due to changes in f5 modules
* Update validate-modules ignore based off a clean execution
* Address merge conflicts
* Address renamed module
* Address recent changes to modules
* Add ignore for ucs_ip_pool
* Update aci modules to get more reliable documentation comparison, but not mutating the module_utils aci_argument_spec
* Update ignore.txt after recent aci updates
* Add extra guard to ensure we handle provider special only for network modules
* Address additional changes to modules
* Mellanox OS name change: MLNXOS changed to ONYX
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix alphabetical order of modules metadata
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* WIP Refactor EOS code to use cliconf
* Fix connection.get where sendonly is True
* Fix pylint issue
* Remove return from send_config and various exec_commands
Also, removed a few try/except, which are anyways handled in
Connection.
* eos - Support use_proxy argument
Running ansible with a proxy set in the environment causes the eos module to
attempt to connect to devices via the proxy.
To prevent this behaviour the only way is to unset the proxy out of the
environment, either by wrapping the ansible calls or doing it in a piece of code
executed before connect, such as a vars_module (though this is very hacky).
This change allows you to set `use_proxy: no` under the provider config.
The default value is set to True, which mirrors the behaviour seen today.
* nexos - Support use_proxy argument
Running ansible with a proxy set in the environment causes the nexos module to
attempt to connect to devices via the proxy.
To prevent this behaviour the only way is to unset the proxy out of the
environment, either by wrapping the ansible calls or doing it in a piece of code
executed before connect, such as a vars_module (though this is very hacky).
This change allows you to set `use_proxy: no` under the provider config.
The default value is set to True, which mirrors the behaviour seen today.
* Updated Avi Modules with following
1. Support to perform patch operation using the modules. The data update method is
selected using avi_api_update_method=patch and patch operation is determined by
avi_api_patch_op. The patch data is the normal params that are provided in the modules
2. Support for avi_credentials as single authentication dictionary for all API calls.
This is preferred way as opposed to previously all credentials details would pollute
the individual Ansible tasks. It also allows the module development to be enhanced
without breaking compatibility for new authentication schemes like SAML etc.
3. Support for sharing api_context between the module invocations. This is a
workaround to not do multiple logins to Avi Controller and be able to
re-use single login across multiple REST API calls.
4. Documentation update for new parameters and existing ones with Units data.
* Fixed the pylint and pep8 errors caused due to pycharm editor auto formatting
* update version parsing and move requirements to nso_* modules
prepare for introduction of nso_show module that has other version
requirements than the existing nso_* modules.
* Add nso_show module for retreiving config from Cisco NSO
New module that supports getting configuration and operational data
from Cisco NSO.
* WIP adds network subnetting functions
* adds functions to convert between netmask and masklen
* adds functions to verify netmask and masklen
* adds function to dtermine network and subnet from address / mask pair
* network_common: add a function to get the first 48 bits in a IPv6 address.
ec2_group: only use network bits of a CIDR.
* Add tests for CIDRs with host bits set.
* ec2_group: add warning if CIDR isn't the networking address.
* Fix pep8.
* Improve wording.
* fix import for network utils
* Update tests to use pytest instead of unittest
* add test for to_ipv6_network()
* Fix PEP8
* Update task definitions for network_cli
* Add connection to debug messages
* Specify connection for prepare task
* pc won't be around for connection=network_cli
* Assorted Python 3 fixes
* Give default port if ansible_ssh_port missing
* delegate -> connection
* Extend error regex
* Fixing aruba's inconsitent indenting.
* Adding config with different children indentation and unit test to confirm the different spacing does not matter.
* Fixing pylint check. Missed an r prefix.
* Bug Fixes to issues foubd during testing
* Removing blank line
* undefined-variable Undefined variable 'run_commands' and training new line
* Reverting and Modifying changes with both Unit test and Integrated test with Devices passing
* Deprecate Entity, EntityCollection and use subspec in network modules
* As per proposal https://github.com/ansible/proposals/issues/76
deprecate use of Entity, EntityCollection, ComplexDict, ComplexList
and use subspec instead.
* Refactor ios modules
* Refactor eos modules
* Refactor vyos modules
* Refactor nxos modules
* Refactor iosxr modules
* Add support for key in suboptions handling
* Fix CI issues
* A first pass at moving libs to new dir structure
The network modules changed their module_utils dir structure.
This first patch establishes mod utils for F5 in this new structure.
Module use will be limited until things are more fleshed out
* Fixing upstream errors
* Fixing more issues
* - Netconf plugin addition for iosxr
- Utilities refactoring to support netconf and cliconf
- iosx_banner refactoring for netconf and cliconf
- Integration testcases changes to accomodate above changes
* Fix sanity failures, shippable errors and review comments
* fix pep8 issue
* changes run_command method to send specific command args
* - Review comment fixes
- iosxr_command changes to remove ComplexDict based command_spec
* - Move namespaces removal method from utils to netconf plugin
* Minor refactoring in utils and change in deprecation message
* rewrite build_xml logic and import changes for new utils dir structure
* - Review comment changes and minor changes to documentation
* * refactor common code and docs updates
* Refactor common network shared and platform specific code into package (part-1)
As per proposal #76 refactor common network shared and platform specific
code into sub-package.
https://github.com/ansible/proposals/issues/76
* ansible.module_utils.network.common - command shared functions
* ansible.module_utils.network.{{ platform }} - where platform is platform specific shared functions
* Fix review comments
* Fix review comments
Anil Kumar Muraleedharan
Kevin Breit
Trishna Guha
Ganesh Nalawade
cclauss
Eitan Akman
Nathaniel Case
James Mighion
James Simpson
Biao Liu
Sumit Jaiswal
Tim Rupp
wiso
Deepak Agrawal
Tyler Bigler
Ricardo Carrillo Cruz
Dag Wieers
Rafael Vencioneck
Matthew Stone
Samer Deeb
Claes Nästén
Sam Doran
Chad Norgan
Kedar Kekan
Peter Sprygada
Ghilli3
Senthil Kumar Ganesan
Dhivyap
abirami-n
Matt Martz
Damian Zaremba
Gaurav Rastogi
Sloane Hertel
Jacob McGill