- Removed required_if.
- Fixed doc strings.
- Removed debug output being appended to actions.
- Put import of basics at bottom to be consistent with other docker modules
- Added 'containers' alias to 'connected' param
- Put facts in ansible_facts.ansible_docker_network
* Check mode fixes for ec2_vpc_net module
Returns VPC object information
Detects state change for VPC, DHCP options, and tags in check mode
* Early exit on VPC creation in check mode
The default VPC egress rules was being left in the egress rules for
purging in check mode. This ensures that the module returns the correct
change state during check mode.
AWS security groups are unique by name only by VPC (Restated, the VPC
and group name form a unique key).
When attaching security groups to an ELB, the ec2_elb_lb module would
erroneously find security groups of the same name in other VPCs thus
causing an error stating as such.
To eliminate the error, we check that we are attaching subnets (implying
that we are in a VPC), grab the vpc_id of the 0th subnet, and filtering
the list of security groups on this VPC. In other cases, no such filter
is applied (filters=None).
EC2 Security Group names are unique given a VPC. When a group_name
value is specified in a rule, if the group_name does not exist in the
provided vpc_id it should create the group as per the documentation.
The groups dictionary uses group_names as keys, so it is possible to
find a group in another VPC with the name that is desired. This causes
an error as the security group being acted on, and the security group
referenced in the rule are in two different VPCs.
To prevent this issue, we check to see if vpc_id is defined and if so
check that VPCs match, else we treat the group as new.
While from the documentation[1] one would assume that replacing
CAPABILITY_IAM with CAPABILITY_NAMED_IAM; this as empirically been shown
to not be the case.
1: "If you have IAM resources, you can specify either capability. If you
have IAM resources with custom names, you must specify
CAPABILITY_NAMED_IAM."
http://docs.aws.amazon.com/AWSCloudFormation/latest/APIReference/API_CreateStack.html
Previously, when the attributes of a GCE firewall change, they were ignored. This PR changes that behavior and now updates them.
Note that the "update" also removes attributes that are not specified.
An overview of the firewall rule behavior is as follows:
1. firewall name in GCP, state=absent in PLAYBOOK: Delete from GCP
2. firewall name in PLAYBOOK, not in GCP: Add to GCP.
3. firewall name in GCP, name not in PLAYBOOK: No change.
4. firewall names exist in both GCP and PLAYBOOK, attributes differ: Update GCP to match attributes from PLAYBOOK.
Current module fails when tries to assign floating-ips to server that
already have them and either fails or reports "changed=True" when no
ip was added
Removing floating-ip doesn't require address
Server name/id is enough to remove a floating ip.
This parameter was actually added in 2.0. It's just that the
documentation in previous versions of the module were wrong (it said the
name was "network" rather than "name.) I've renamed the parameter in
the documentation of prior versions so ansible-module-validate should no
longer think that this is a new parameter.
The shade update_router() call will return None if the router is
not actually updated. This will cause the module to fail if we
do not protect against that.
The os_server module could automatically generate a floating IP for
the user with auto_ip=true, but we didn't allow for this FIP to be
automatically deleted when deleting the instance, which is a bug.
Add a new option called delete_fip that enables this.
Without this, ansible 2.1 will convert some arguments that are
meant to be dict or list type to their str representation.
Signed-off-by: Patrick Uiterwijk <puiterwijk@redhat.com>
The `source_dest_check` and `termination_protection` variables are being
assigned twice in ec2.py, likely due to an incorrect merge somewhere
along the line.
The IAM group modules were not receiving the `module` object, but they
use `module.fail_json()` in their exception handlers. This patch passes
through the module object so the real errors from boto are exposed,
rather than errors about "NoneType has no method `fail_json`".
* Change documented options for os_networks_facts
os_network_facts currently lists 'network' as an available option, taking the Name or ID. In Ansible 2.0.2 to 2.2.0, this is not valid. Options 'name' and 'id' should be used instead.
* Update os_networks_facts.py
* Update os_networks_facts.py
Set version_added to the only accepted value
* Update os_networks_facts.py
Removed inappropriate 'ID' parameter
Ceph Object Gateway (Ceph RGW) is an object storage interface built on top of
librados to provide applications with a RESTful gateway to Ceph Storage
Clusters:
http://docs.ceph.com/docs/master/radosgw/
This patch adds the required bits to use the RGW S3 RESTful API properly.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
The "Developing Modules" documentation states:
Include a minimum of dependencies if possible. If there are
dependencies, document them at the top of the module file, and have
the module raise JSON error messages when the import fails.
When docker_service runs on a remote host without PyYAML it crashes with
ImportError.
This patch raises a JSON error message when import fails, but only if
the PyYAML module is actually used. It's only needed when the
"definition" parameter is given.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Reading the entire tar file into memory can result in out-of-memory
conditions such as this traceback:
Traceback (most recent call last):
File "/tmp/ansible_YELTSu/ansible_module_docker_image.py", line 486, in load_image
self.client.load_image(image_data)
File "/usr/local/lib/python2.7/dist-packages/docker/api/image.py", line 147, in load_image
res = self._post(self._url("/images/load"), data=data)
...
File "/usr/lib/python2.7/httplib.py", line 997, in endheaders
self._send_output(message_body)
File "/usr/lib/python2.7/httplib.py", line 848, in _send_output
msg += message_body
MemoryError
Luckily docker-py's load_image(), which calls requests post(), accepts a
file-like object instead of a string. Pass in the file object to avoid
reading the full file into memory. This allows larger tar files to load
succesfully.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
* This moves the lines in the code that parse the `env` and `env_file` options for docker to the end of the `__init__()` function.
This is needed because the `_check_capabilites` function needs both a working `self.client` and a proper `self.docker_py_versioninfo`.
`_check_capabilities` is used by `ensure_capabilities` which is, in turn, used by `get_environment`
This means that before this commit, the environment variables could not be loaded because both `self.client` and `self.docker_py_versioninfo` were not set at that time.
This commit fixes that by putting the environment variable parsing after those two.
* This moves the lines in the code that parse the `env` and `env_file` options for docker to the end of the `__init__()` function.
This is needed because the `_check_capabilites` function needs both a working `self.client` and a proper `self.docker_py_versioninfo`.
`_check_capabilities` is used by `ensure_capabilities` which is, in turn, used by `get_environment`
This means that before this commit, the environment variables could not be loaded because both `self.client` and `self.docker_py_versioninfo` were not set at that time.
This commit fixes that by putting the environment variable parsing after those two.
The default pagination is every 100 items with a maximum of 1000 from
Amazon. This properly uses the marker returned by Amazon to concatenate
the various pages from the results.
This fixes#2440.
* Fixing error exception handling for python. Does not need to be compatible with Python2.4 b/c boto is Python 2.6 and above.
* Fixing error exception handling for python. Does not need to be compatible with Python2.4 b/c boto is Python 2.6 and above.
* Fixing compile time errors IRT error exception handling for Python 3.5.
This does not need to be compatible with Python2.4 b/c Boto is Python 2.6 and above.
This is to address this error:
fatal: [site]: FAILED! => {"changed": false, "failed": true, "msg": "Failed to connect to S3: Region does not seem to be available for awsmodule boto.s3. If the region definitely exists, you may need to upgrade boto or extend with endpoints_path"}
Commit 0dd58e9 changed the logic so an exception is thrown (by
`connect_to_aws`) before the `s3 is None` check is performed. This
changes the `None` check to a catch so the old logic can compensate.
Linus Arver
chouseknecht
PikachuEXE
Chris Houseknecht
Brian Coca
muxator
chouseknecht
Shawn Siefkas
Rick Mendes
Lyle Mantooth
Julien Vey
Monty Taylor
Jasmine Hegman
Shaun Brady
John Baublitz
Ryan
chrisweaver
Matthew Martin
Michael Baydoun
Tom Melendez
Kai Kousa
yfried-redhat
Andrei Lukovenko
Toshio Kuratomi
h-hirokawa
jjshoe
David Shrewsbury
Qi Luo
Rene Moser
Adrian Moisey
Patrick Uiterwijk
Ryan Brown
Hrishikesh Barua
Rodríguez, Jorge
Graham Goldstein
Mario David
Javier M. Mellid
Adam Butler
Hagen Kuehn
Stefan Hajnoczi
Bradley Phipps
Vince v. Oosten
Matt Davis
mansunkuo
nitzmahone
Elena Washington
Gilles Gagniard
Jonathan A. Sternberg
pic
Michael Pappas
@
Mike Mars
Jirayut 'Dear' Nimsaeng
Anton Simernia
Dan Schmidt
David Fischer
Ghe Rivero
Roberto Bampi
Brian Coca
Alvaro Aleman
Doug Luce
Michael Scherer