If enable_snat is False, this should be used to build the
request, because the default value in the OpenStack Networking
API is True.
Fixes the issue #45915.
* ios_facts: Fix LLDP gathering without neighbors
When LLDP is enabled but no neighbors are present, the following
structure is generated:
...
"ansible_net_neighbors": {
"null": [
{
"host": null,
"port": null
}
]
},
...
If we are not able to find any relevant LLDP information, bail out early
so cases like shown above are handled more gracefully.
* ios_facts: Remove trailing space in lineprotocol
Some Cisco devices (at least CSR1000V 16.6.4) add a space after the
line protocol. This causes the space to be present in the result of
fact gathering:
"ansible_net_interfaces": {
"GigabitEthernet2": {
...
"lineprotocol": "up ",
Be more clear about scanning the output to avoid this behaviour.
* adding explanation of replace_all_instances
How does "replace_all_instances" work? does it increase the number of instances by 1 in the Load balancer and it scales in a server and waits for it to complete its health check, OR does it terminate a node a that causes an autoscale event to happen and then adds a new server?
+label: docsite_pr
* Enable communication to management API over HTTPS.
* Specify version added tags to new parameters
* Set proper parameter type.
* Corrected version_added numbers.
* Extracted commons to ansible utils.
* Fix PEP8 error
* Fix documentation extension syntax.
Fixes#22953
* Remove unnecessary workaround
* add test: set RABBITMQ_NODENAME environment variable
The following error occurs:
TASK [rabbitmq_user : Add user] ***
fatal: [testhost]: FAILED! => {
"changed": false,
"cmd": "/usr/sbin/rabbitmqctl -q list_users",
"rc": 69,
"msg": "Error:********@c65c2bc59398'. Please see diagnostics information and suggestions below.\n\nMost common reasons for this are:\n\n * Target node is unreachable (e.g. due to hostname resolution, TCP connection or firewall issues)\n * CLI tool fails to authenticate with the server (e.g. due to CLI tool's Erlang cookie not matching that of the server)\n * Target node is not running\n\nIn addition to the diagnostics info below:\n\n * See the CLI, clustering and networking guides on http://rabbitmq.com/documentation.html to learn more\n * Consult server logs on node test@c65c2bc59398\n\nDIAGNOSTICS\n===========\n\nattempted to contact:********@c65c2bc59398\n * effective user's home directory: /var/lib/rabbitmq\n * Erlang cookie hash: 3MxcYFrJzfhEL+FlUfLlQw==",
"stderr": [...],
"stderr_lines": [
"Error: unable to perform an operation on node 'test@c65c2bc59398'. Please see diagnostics information and suggestions below.", "",
"Most common reasons for this are:", "",
" * Target node is unreachable (e.g. due to hostname resolution, TCP connection or firewall issues)",
" * CLI tool fails to authenticate with the server (e.g. due to CLI tool's Erlang cookie not matching that of the server)",
" * Target node is not running", "",
"In addition to the diagnostics info below:", "",
" * See the CLI, clustering and networking guides on http://rabbitmq.com/documentation.html to learn more",
" * Consult server logs on node test@c65c2bc59398", "",
"DIAGNOSTICS", "===========", "",
"attempted to contact: [test@c65c2bc59398]", "",
"test@c65c2bc59398:",
" * connected to epmd (port 4369) on c65c2bc59398",
" * epmd reports: node 'test' not running at all",
" other nodes on c65c2bc59398: [rabbit]",
" * suggestion: start the node", "",
"Current node details:",
" * node name: rabbitmqcli2@c65c2bc59398",
" * effective user's home directory: /var/lib/rabbitmq",
" * Erlang cookie hash: 3MxcYFrJzfhEL+FlUfLlQw==", ""
],
"stdout": "",
"stdout_lines": []
}
* node parameter: fix default value
'rabbit' is the default value mentioned in the module documentation.
* module_utils.urls: add fetch_file function
* apt: use fetch_file instead of own download()
* unarchive: use fetch_file instead of own codecopy
* apt: add test for deb=http://…
* unarchive: add test for a remote file download and unarchive
* yum: replace fetch_rpm_from_url by fetch_file
* use NamedTemporaryFile
* don't add a dot to fileext, it's already there
* allow update_cache as stand alone operation for yum/dnf
Fixes#40068
Signed-off-by: Adam Miller <admiller@redhat.com>
* make sanity tests happy
Signed-off-by: Adam Miller <admiller@redhat.com>
On connection errors the influxdb python module raises an exception with
an empty message leading to a fail_json with an empty error message:
265d14736b/influxdb/influxdb08/client.py (L252)
Fail with a more descriptive error in this case.
Currently, Ansible interprets variables with a True|False value as
boolean. This causes the vmware_deploy_ovf module to break, because
it can only accept string values as properties.
This fix checks if a value is boolean, and converts it to a string
if it is. Since integers do not seem to be causing the same error, this
is the only check we appear to need.
After completion, OVF properties that are boolean can be specified as
yes|no or true|false.
Closes: #45528
* Add chdir support to win_package
* Add chdir support to uninstall too.
* Update docs to account for uninstall.
* Correct variable substitution for hashtable.
* added changelog fragment
* Added module to manage manageiq tenants
* Fixed pep8 and module validation issues for manageiq_tenant
* Changes based on review
- Added parent attribute to specify the parent
- Cleanup return of tenant
- Update documentation on quotas
* Updated version added to 2.8
* Allow to specify images by hash for docker_container and docker_image_facts.
* flake8
* More sanity checks.
* Added changelog.
* Added test.
* Make compatible with Python < 3.4.
* Remove out-commented imports.
* Don't simply ignore container in present() if image is not specified.
* Use image from existing container for recreation if not specified.
* Added changelog.
* Improve comment.
* Ovirt_disk - Add ability to refresh passthrough disks
A new paramter "host" is added. When this paramter is specified the newly
created disk or an existing disk will refresh its information about the
underlying storage via the specified host. This oprion is only valid for
passthrough disks. This option requires at least the logical_unit.id to be
specified.
* Host search modification and some other minor changes.
* pep8 correction
* ovirt add snapshot delete after x days
* update logic of deleting snapshot and rename it
* update docs and names of vars
* update docs syntax
* Update ovirt_snapshot.py
* put remove logic to function
* use default removing function for snapshot
* macports: Replace update_ports with selfupdate
- Macports discourages use of `port sync` and recommends using `port
selfupdate` instead.
- Keep `update_cache` and `update_ports` as aliases.
- No longer require the `name` parameter so that `selfupdate` can be
used in a task by itself.
* macports: Add upgrade parameter
- New upgrade parameter which can be used to upgrade all outdated ports.
* Add changelog fragment
* win_exec: refactor PS exec runner
* more changes for PSCore compatibility
* made some changes based on the recent review
* split up module exec scripts for smaller payload
* removed C# module support to focus on just error msg improvement
* cleaned up c# test classifier code
In a scenario where you've set your logstash heap size high, you may need to set your heap lower in order to execute logstash-plugin while logstash is still running.
Here's an example of someone running into insufficient memory while executing logstash-plugin: https://discuss.elastic.co/t/logstash-plugin-and-jvm-options/99646
This scenario is probably fairly common, so it may be worth documenting as an example.
+label: docsite_pr
* docker_container: Honour stop_timeout when creating docker containers (#43814)
* Adjusting description to what actually happens.
See docker-py changelog for 2.7.0: 'APIClient.stop will
no longer override the stop_timeout value present in the
container’s configuration.'
* Add a test whether stop_timeout can be configured for the container.
* Added changelog.
* Integrate with comparisons (by default, ignore stop_timeout value for restarts; will be configurable with PR ansible/ansible#44789).
* Fix config change code and tests (#2)
* Improving wildcard test.
* Using correct config.
Previously, when the active SELinux value was the same as the desired value, regardless of the value of `persistent`, the module would simply exit successfully, assuming no need for update. This made the assumption that the active and persistent values should be the same, but that is not always the case. This modification treats both the active and persistent values separately when checking for the need to update. Note that the persistent update mode, however, will still update the active as well as the persistent value. If this is not desired, it is possible to separately toggle the active value alone.
Other changes:
* Make the check mode actually perform checks for changes
* Organizes semanage commands into set of logical steps
This prevents a stack trace in Python 3 when the result is an empty file since
the file is open in binary mode and a native string in Python 3 is str,
not bytes.
* modules/systemd: fix logic: allow scope to default to 'system'
Fix logic introduced in 7ea909418e5: if 'scope' param is not specified,
it defaults to system, but the value of module.params['scope'] is None,
not 'system' - so allow for that.
* modules/systemd: fix logic: disabled means disabled
Fix logic determining whether a service with both systemd and initd files is enabled or disabled.
In situations where systemd thinks service is disabled, but rc.d symlinks mark it as enabled,
this module wrongly assumes the service is enabled.
Fix this logic: disabled means disabled
Only when the output from does NOT include disabled, consider the status of rc.d symlinks.
This essentially replicates the fixes done to the systemd handling in the "service" module in 3c89a21e0cFixes#22303Fixes#44409
* Fix spelling of 'separate' throughout.
* Various cleanups in the User Guide for Vault.
- Fix spelling of 'algorithm'
- Fix indentation of nested list in payload format
- Fix mysterious refernce to 'b_pkey1'.
- Fix reference to newline as '\n': the backslash is lost when rendered
to the docs website. Specify the hex value for newline instead of the
backslash escape.
* Fix formatting
* Update vault.rst
In DNF < 3.0 are lists, and modifying them works
In DNF >= 3.0 < 3.6 are lists, but modifying them doesn't work
In DNF >= 3.6 have been turned into tuples, to communicate that
modifying them doesn't work
Further explanation of this is available via Adam Williamson from
the Fedora QA Team.
https://www.happyassassin.net/2018/06/27/adams-debugging-adventures-the-immutable-mutable-object/
Signed-off-by: Adam Miller <admiller@redhat.com>
* win_nssm: add failing tests for issue #44079
* win_nssm: use Run-Command instead of Invoke-Expression to prevent interpretation issue
Fix#44079
* win_nssm: add more failing tests
These tests highlight several issues with this module:
* Service not started when state=started
* Errors with app_parameters (see #25265)
* Exception when passing several dependencies separated by comma as specified in doc
* win_nssm: fix service not started when state=started
Nssm status returns a multiline output that doesn't match any of the strict patterns in the switch statement.
* win_nssm: fix incorrect separator in doc for service dependencies
The dependencies parameter works with space as separator, but not with comma as shown in the documentation
* win_nssm: fix error with app_parameters parameter
Fix#25265
* win_nssm: add idempotence tests
* win_nssm: fix several idempotence issues and misbehaviors
Add missing space between arguments when app_parameters contains several keys.
Use Argv-ToString and Escape-Argument to improve arguments handling (parameters with quotes, backslashes or spaces).
* win_nssm: test parameters with spaces, quotes or backslashes
* win_nssm: restore comma as separator for service dependencies
Revert commit ddd4b4b
* win_nssm: restore support of string as dict form for app_parameters and remove support of literal YAML dict
* win_nssm: wrong variable in tests
* Update win_robocopy.py
<!--- Show example of UNC path copy of a single file, noting trailing backslash required -->
+label: docsite_pr
* addresses jborean comment, removes double quotes
* Remove trailing slash part
* Added feature facts to nxos_facts
* Fixed ansibot indentation
* Resolved ansibot whitespace missing after ','
* Per PR suggestion, created method in base class to gather switch config
and store in global variable to prevent multiple calls to switch.
* Addressed ansibot blank line & whitespace after ,
* Enable support for launch_templates in ec2_asg
* Fix asg create with LT and no version number
* Update mutually exclusive list
* Better function names
* Update synchronize.py
If you want a different rsync binary on the local side, you need to set task variable ansible_rsync_path.
See examples.
Variable ansible_rsync_path looks to not be documented anywhere. If documented, needs to be said that is does not belong to synchronise options, instead belongs to tasks. (Sorry, I have no better wording)
* [rabbitmq_binding] Fix the quoting of vhost and other names, which was broken in PR #35651
* Merge missing urllib_parse.quote from PR #42422
* Missed one line, where also needs to be escaped, i.e., the destination
* Various changes to nxos_logging. Plus added purge capibility.
* Made a few new nxapi_logging test cases conditional based on version
and/or platform.
* Addressed PR comments and ansibot shippable. Fixed up nxos_logging documentation format.
* Addressed ansibot shippable issues with whitespaces and documentation.
* Resolved ansibot codestyle trailing whitespace
<!--- Your description here -->
The documentation states the use of the "value" attribute for environment variables while this should also be the "job" attribute.
+label: docsite_pr
* Sorting args.
* Doing comparisons of options with container parameters in a more context-sensitive way.
This prevents unnecessary restarts, or missing restarts (f.ex. if parameters are removed from ``cmd``).
* Make blkio_weight work.
* Fix cap_drop idempotency problem.
* Making groups idempotent if it contains integers.
* Make cpuset_mems work.
* Make dns_opts work.
* Fixing log_opts: docker expects string values, returns error for integer.
* Adding tests from felixfontein/ansible-docker_container-test#2.
* Make uts work.
* Adding changelog entry.
* Forgot option security_opts.
* Fixing typo.
* Explain strict set(dict) comparison a bit more.
* Improving idempotency tests.
* Making dns_servers a list, since the ordering is relevant.
* Making dns_search_domains a list, since the ordering is relevant.
* Improving dns_search_domains/dns_servers.
* Fixing entrypoint test.
* Making sure options are only supported for correct docker-py versions.
* fixes#45941
* corrects regression introduced by #26104; when the resource group doesn't exist, the module exits prematurely with an error instead of creating it.
* Unify login behavior between 1Password lookup plugins and module
- Use the same names for all credential aspects
- Only require the minimal amount of information for each
- Add more examples
* Change parameter terms
- use terms in line with 1Password documentation.
- update examples
- update tests
* Improve error messages in lookup plugin
* Unify onepassword_facts with lookup plugins
- use same methods and logic for signing in or reusing existing session
- unify terms with lookup plugins
* Change rc test for determing login
An rc other than 1 can be returned when a current login session does not exist.
* Create AnsibleModuleError class
ansible.errors is not available to modules, so create an AnsibleModuleError class within the module
Do not user os.path.expanduser since this is already done by virtue of the type being "path" in the argument spec.
* Add note about risk with fact caching sensitive data
* Add note on op version that was used for testing
This is because underscores are illegals in hostnames and users might
want to create the same host names are the name of the Linode machine
(as in the report in #30059).
Closes https://github.com/ansible/ansible/issues/30059.
* Update azure_rm_virtualmachine.py
A lot of Azure images are not cloud-init ready and need to be prepared manually before attempting to use the custom_data option of this module. Adding a line to the description to make others aware. If, like me, they are used to working with AWS AMIs that all seem to have cloud-init baked in, this could prevent some troubleshooting as to why their custom_data scripts aren't running in Azure.
* fixing addition to azure_rm_virtualmachine.py
* Update azure_rm_virtualmachine.py
* final update
* fixed url syntax
* nuked trailing whitespace
* win async: use async_dir for the async results file directory
* tried to unify POSIX and PowerShell async implementations of async_dir
* fix sanity issue
* handle yum and dnf lockfiles - fixes#44120
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix logic problem to properly check for dnf lockfile glob
Signed-off-by: Adam Miller <admiller@redhat.com>
* Added documentation for collectstatic --clear.
Added a description of the --clear argument used with the Django management
command, collectstatic. (When #1810 added this feature the documentation
was not updated).
no such option "config" for diff_against argument.
Further below, there is an example of eos_config using diff_against with a valid option.
+label: docsite_pr
anasbadaha
gardouille
Abhijeet Kasurde
Dominik Holler
Paul Neumann
Sebastien Pouplin
Thomas Picariello
AndyG
Jorge Rodriguez (A.K.A. Tiriel)
Nick
bjakubiak
Joey
Ondra Machacek
Cyril Jouve
Pilou
Benoit Dunand-Laisin
Dan Quinn
Tom 'Biwaa' Riat
Major Hayden
Sandra McCann
Matt Clay
Evgeni Golov
Adam Miller
Guido Günther
Jay Jahns
Felix Fontein
Christian Kotte
Trishna Guha
Simon Liddicott
Jordan Borean
Mehdi Youb
flowerysong
Evert Mulder
ABond
Rémy Léone
Yixin Xu
Dag Wieers
rhodain
Martin Nečas
Jonathan
Sam Doran
Ganesh Nalawade
Bianca Henderson
newtonne
Rohan Sadale
Peter Jenkins
Erwan Quelin
cadl42
mrmagooey
Egor Zaitsev
Will Thames
Zim Kalinowski
Juan Martinez
Chris Scheib
Jason Meridth
Daniel Jaouen
abarbare
Remo Wenger
Matthew Krupcale
Daniel Jakots
Metzger, Simon
Vlad Mencl
Dave Buckley
Brendan Jurd
Sloane Hertel
Susant Sahani
David Passante
Kevin Subileau
Yunge Zhu
aaronk1
tstoner
saichint
René Moser
Nathan Webster
José Maia
Dan
Hirshr
tomww
Anoop Sood
akira6592
Gustavo Muniz do Carmo
Joachim Mathes
Tobias Wolf
Horie Issei
Susant Sahani
Rémy Léone
Vinay Dandekar
santascsi
jgkirschbaum
Tom Hodder
Matt Davis
Adam Harvie
Colin McCarthy
Chris Smolen
lwm
Michael Johnson
max-allan-surevine
Alicia Cozine
Yanis LISIMA
Marc Sensenich
ansibot
Joseph Benden
David Resnick
Chris Archibald
Adrián
Tom Paine
Stuart MacKay
Eric Helms
Daniel Speichert
ndswartz
Michael Scherer
cordones
Jon Dufresne
Michael Scherer
Michael Tipton