This is the original `hponcfg` module that was once accepted in
Ansible but had been removed subsequently because it could not be tested
by the Ansible project.
Since then it was moved to the ansible-provisioning project and
maintained by HP engineers going forward.
Now we are trying to get it upstreamed again.
* Fix vyos signatures to match new versions
* Fix test cases referring to 'updates' instead of 'commands'
* I think this is an artifact of `connection: network_cli`?
* module will now check protocol running state before return
* warns on config argument no longer being needed
* lots of integration test cases updated
* updates unit and integration test cases for state check
fixes#21908
eos_config module wasn't respecting config block path (parents). This
patch fixes that problem. Also fixes a number of integration tests
cases
fixes#21903
* win_copy: Add force parameter and check-mode support
The rationale behind this is that if you're working with +3GB files,
creating the checksum takes a lot of time, which we can avoid by simply
testing if the file exists.
I also took the liberty to put the various parameters together. It
probably takes a (neglible) performance hit but makes the code a bit
easier to inspect/work with, as its closer to all other windows modules.
On a normal run, the action plugin does a local checksum of the source
and a remote checksum of the destination. And afterwards, the module
will do another remote checksum of the copied source, a remote checksum
of the original destination, and another remote checksum of the copied
destination.
On a very huge file (think 4GB) that means 5x reading the complete file
(if you have a large cache you may get away with it, otherwise you're
doomed !).
This patch will ensure with `force: no` that not checksums are being
performed.
* Moving presence check before remote checksum
* Adapted to wishes
* Even more performance improvements
get_masquerade_* functions only take one arg. The action_handler
wrapper function expected a tuple, but was being passed (zone)
instead of (zone,) making for an ambiquous tuple. The
(zone) arg was being treated as a tuple/list of six chars
(the zone name) instead of a tuple of one string.
This would cause errors like:
get_masquerade_enabled_permanent() takes exactly 1 argument (6 given)
Fixes#21632
* New module for setting up Avi Pool
* Fixed inconsistency between argspec and documentation regarding defaults and required attributes
* Added support for module_check
* Added new module to setup Avi VirtualService
* Fixed the documentation error where [] brackets where used making it incompatible with yaml
* Fixed inconsistency between argspec and documentation regarding defaults and required attributes
* Added support for check mode
* New module for setting up Avi SSL Key and Certificates for Virtual Services
* Fixed inconsistency between argspec and documentation regarding defaults and required attributes
* Added support for module_check
* New module for setting up Avi Pool Group settings.
* Fixed inconsistency between argspec and documentation regarding defaults and required attributes
* Added support for module_check
* New module for setting up Avi Pool Health Monitors
* Fixed inconsistency between argspec and documentation regarding defaults and required attributes
* Added support for module_check
* Update metadata on existing openstack instances
This adds or updates existing keys, but doesn't remove them
Fixes#5500
* Set meta to {} if None
* Move common metadata parsing into a method
* win_environment: Clean up, check-mode and diff support
Changes include:
- Remove trailing semi-colons
- Replaced PSObjects into normal hashes
- Make use of Get-AnsibleParam and types
- Added check-mode support
- Added diff support
* Improve diff-support by using standard naming
I started to use the variable $diff_support for the boolean that takes
care of diff output support.
Changes include:
- Use Get-AnsibleParam with -type/-validateset
- Replace $result PSObject with normal hash
- Deprecate 'upgrade' parameter by using state=latest
* win_user: Clean up parameter handling and $result hash
Changes include:
- Use of Get-AnsibleParam and parameter types/validateset
- Removed parameter validation
- Replace $result PSObject with normal hash
* Revert to original formatting
* Parameter "groups" is a list
* win_file_version: Clean up parameter handling and $result hash
Changes include:
- Replacing $result PSObject with hash
- Use Gt-AnsibleParam using -type
* Revert to original formatting
* win_group: Clean up and check-mode support
Changes include:
- Use Get-AnsibleParam with -type/-validateset support
- Replace $result PSObject with normal hash
- Add check-mode support
* Revert to original formatting
* win_owner: Clean up and check-mode support
Changes include:
- Use Get-AnsibleParam with -type/-validateset
- Replace $result PSObject with normal hash
- Add check-mode support
* Implemented -WhatIf:$check_mode support
* Revert to original formatting
* win_share: Clean up parameter handling
Changes include:
- Use Get-AnsibleParam with -type/-validateset
- Replace $result PSObject with normal hash
* Revert to original formatting
* win_lineinfile: Clean up and check-mode and diff support
Changes include:
- Use Get-AnsibleParam with -type support
- Replace $result PSObject with normal hash
- Remove trailing semi-colons
- Fix indentation (majority is tabs, few lines using spaces)
- Add check-mode support
- Support `r and `n for CR and LF
- Add diff support
* Implement -WhatIf:$check_mode support
* Keep original formatting as requested
* win_stat: Clean up and bugfixes
- Fix an issue where LastWriteTime was actually LastAccessTime
- Return lnk_source = $null for a broken link
- Remove a useless -Replace '\\','\\'
- Make use of new parameter options (-type and -aliases)
* Deprecate get_md5 with checksum_algorithm: md5
As suggested in comments we deprecate get_md5 and internally
replace it with `get_checksum` and `checksum_algorithm: md5`.
We show a warning to the user about this change.
Also remove empty warnings output. This simplifies modules code
(e.g. standard empty list is provided and snippets can add items).
* Adapted to use the new Add-DeprecationWarning() mechanism
* Revert to original formatting
* win_slurp: Small cleanup
Included changes:
- Rewriting the parameter handling (aliases and type)
- Modified the $result hash for both Exit-Json and Fail-Json
- Changed the Test-Path statement
* Revert to original formatting
* win_get_url: Clean up and check-mode support
Changes include:
- Clean up parameter handling
- Replace $result PSObject with hash
* Revert to original formatting
When parsing the configuration, the wrong indent level was set so the
configurations could not be properly compared. Also noted that
defaults: yes needed to be added to the integration tests to make the
test cases valid, which is also included in this patch
fixes#21828
* Added the aix_inittab module to be able to modify the inittab at AIX systems.
* fixed identation errors
* fixed identations and trailing whitespace
changed if conditions
* repaired tab-identation
* adjusted to long line and identation
* Adjusted the yaml in the example documentation
* Adjusted the documentation yaml
* Repaired return yaml
* repaired typo
* Removed unnecessary parameters from comment
changed action to state, and changed the way to call this module
changed proccessaction to action
* adjusted result['warnings'] to module.warn()
* adjusted the documentation
* changed warning to failed
ran module against autopep8
* added check_mode
* fixed typo
* changed description and short description, to be able to push again after a failure at shippable
Set the `force` flag to false to:
- protect existing Keys from being overwritten
- check if a Key was already existing by evaluating
the returned `changed` status
When retrieving the http_port, https_port values from the configuration
of the device, the values need to cast to int in order to correctly
compare against the argspec values. This patch fixes that problem.
fixes#21832
trying to import from the wrong shared lib, this patch changes
network_common to connection. Also fixes a bug found in the nxos
action plugin to detect transport
fixes#21829
The reverted change (Examples syntax batch7 (#5624), 99de7f0) makes the
example not match its description.
modified: lib/ansible/modules/utilities/logic/set_fact.py
Sending the save command over nxapi requires text mode otherwise nxapi
will reject the command. This commit ensures that the command is always
sent in text mode
fixes#18971
CentOS's cloud image wiki page (wiki.centos.org/Cloud/AWS) gives an
example of using their product code to search for AMIs. This commit
adds an optional parameter to ec2_ami_find to allow this filtering.
There as an invalid key in the command dict that would cause failure
using prompts. This changes the key from response to answer which is
what is expected by network_cli
MySQL returns privileges on columns as "PRIVILEGES (column)".
For permissions to be correctly matched, it must be specified exactly the
same in the module argument. A resulting string is like
"dbname.dbtable:PRIVILEGES (column)". Thus, the space before the opening
parenthesis must also be removed when creating the set of privileges for
validation.
* #19587: refactor to PEP8
* Issue: #19587: add skip_broken option to yum module
PNTSYSOPS-1901 - internal reference
Signed-off-by: Veaceslav Mindru <vmindru@redhat.com> <mindruv@gmail.com>
* Issue: #19587: fix line break, attempt to make readble
things at line 646 look ugly ..
trying to make them look a bit more human readble
though the entire approach should be rewriten
PNTSYSOPS-1901 - internal reference
Signed-off-by: Veaceslav Mindru <vmindru@redhat.com> <mindruv@gmail.com>
* #19587: fixing typo, skip-broken has to be passed as list
* PR: #21475: peer review changes
relates to: revert comment deletion https://github.com/ansible/ansible/pull/21475#discussion_r101574146
relates to: remove irelevant var https://github.com/ansible/ansible/pull/21475#discussion_r101573388
relates to: reformat https://github.com/ansible/ansible/pull/21475#discussion_r101572840
Signed-off-by: Veaceslav Mindru <vmindru@redhat.com> <mindruv@gmail.com>
* PR: #21475: peer review changes
relates to: https://github.com/ansible/ansible/pull/21475#discussion_r101573736
Signed-off-by: Veaceslav Mindru <vmindru@redhat.com> <mindruv@gmail.com>
* Issue: #21475: fixing typo in the Man section
Signed-off-by: Veaceslav Mindru <vmindru@redhat.com> <mindruv@gmail.com>
* PR: #21475 - Peer review: revert variable a
Relates to: https://github.com/ansible/ansible/pull/21475#pullrequestreview-22404868
Signed-off-by: Veaceslav Mindru <vmindru@redhat.com> <mindruv@gmail.com>
* Issue: 19587 - small correction
Signed-off-by: Veaceslav Mindru <vmindru@redhat.com> <mindruv@gmail.com>
In order to populate the total and free mem of an IOS device, we run
the 'show memory statistics' command.
The output shows something similar to:
Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)
Processor BEAE880 335215488 64044364 271171124 268918092 268463852
I/O 8DAE880 51380224 41880736 9499488 9461552 9352252
We need to just parse the line containing 'Processor' and get the first and third
number for total and free mem, instaed for first and second as the code wrongly
does.
* Adding Cumulus NCLU module
* Delete incorrect testing folder
* wrong import location for nclu test
* another wrong import location for nclu test
* unittest library doesn't support 'skip', removing 'real' nclu tests
* Don't need stringio since I'm not doing real tests
* got rid of unnecessary shebang in test_nclu
* version set to 1.0
* Documentation fixes
The following items were implemented:
- Replace PSObject with normal hash
- Replace Set-Attr function with normal hash assignment
- Re-indent code (make sure everything uses 4 spaces)
- Remove trailing semi-colons
* Add new module aos_logical_device
* Add hard stop to documentation
* Removed required false from documentation
* Add comment before sleep
* Replace IP Pool by Logical Device in the doc
* Add module aos_login
* Cleanup documentation and add hard stop
* Add default value in doc for port and remove required: false
* Fix typo in doc for check mode
* Add module aos_asn_pool
* Add hard stop to documentation
* Remove required: false from doc
* Add pool name in error message when in_use
Change Asn for ASN
* Change the documentation for content
* Initial version of aos_device
* Clean up documentation
* Move try/except closer to device.approve
* Remove non valid characters
* Change option approve to type bool and fix some typo
* Move availability_zone docs to each OpenStack module
This argument is in the central list for hysterical raisins (mostly me
being a doofus) but is used in almost none of them. Document it
explicitly in each module to stop the confusion.
* Fix two docs formatting bugs
* Add NetApp SolidFire volume module
* Make requested changes
* Make requested changes
* Set supports_check_mode to True
* Make requested changes
* Change new_account_id to account_id, 512emulation
* Make requested changes
* Add alias for enable512e
* Move byte_map to utils and add exit message
* Update description for ‘attributes’
* refactor postgres,
* adds a basic unit test module
* first step towards a common utils module
* set postgresql_db doc argument defaults to what the code actually uses
* unit tests that actually test a missing/found psycopg2, no dependency needed
* add doc fragments, use common args, ansible2ify the imports
* update dict
* add AnsibleModule import
* mv AnsibleModule import to correct file
* restore some database utils we need
* rm some more duplicated pg doc fragments
* change ssl_mode from disable to prefer, add update docs
* use LibraryError pattern for import verification
per comments on #21435. basically LibraryError and touching up its usage in pg_db and the tests.
fix failing fail_json call in postgresql_schema
- Bugfix Pull Request
modules/database/postgresql/postgresql_schema
```
2.3.0
```
Here's an example of the error that was coming out. Massaged some linebreaks and backslashes to make it more readable:
"module_stderr": "Traceback (most recent call last):
File "/tmp/ansible_3X05GE/ansible_module_postgresql_schema.py", line 274, in <module>
main()
File "/tmp/ansible_3X05GE/ansible_module_postgresql_schema.py", line 265, in main
module.fail_json(msg="Database query failed: %s" %(text, str(e)))
NameError: global name 'text' is not defined
",
Now it triggers with the correct exception and shows the traceback. This duplication of str(e) and traceback seems to be the best design pattern.
Sample of the new output:
An exception occurred during task execution. The full traceback is:
Traceback (most recent call last):
File "/tmp/ansible_gp4v1Q/ansible_module_postgresql_schema.py", line 254, in main
changed = schema_create(cursor, schema, owner)
...
return super(DictCursor, self).execute(query, vars)
ProgrammingError: permission denied for database schemadb
fatal: [localhost]: FAILED! => {
"changed": false,
"failed": true,
...
},
"msg": "Database query failed: permission denied for database schemadb\n"
allows user to force persistent connection to close, needed for when
you want to benefit from changes applied to the current play but persistent connections
prevent them from being realized.
If versioning is not enabled, then `get_bucket_versioning`
can return an empty dict.
If that happens, the code to enable versioning should still
run!
The logic for suspending versioning was also incorrect, so
have updated that too.
Fixes#20491
Introduces `ignore_nonexistent_bucket` option that does not require ListBuckets permission, so less permissioned IAM roles can still be used with this module.
Fixes#20501
* First set of CNOS network modules
Two modules: cnos_vlan and cnos_command. First 2 of 17 CNOS modules
* Revert "First set of CNOS network modules"
This reverts commit 63da68b2a857e622b449f514050eed25fbcf0a35.
* cnos_vlan module
First of 17 CNOS modules
* Modify playbook for cnos_vlan module testing
* fix issue found by shippable in cnos.py
* cnos_backup module
* Fix Python3.5 compilation error
* remove cnos_backup module from this PR
* add aliases file so that testing of the cnos_vlan module will be skipped.
* Use empty aliases file
* utility scripts under module_utils changed to BSD license.
* clean up PEP8 issues, add cnos_vlan tests
* remove blank lines from yml files
* remove more blank lines
* remove even more blank lines
* Revert "remove even more blank lines"
This reverts commit bb3998661ce387260340bca39d5f146f5ec54f44.
* re-submit last commit
* fix blank lines in this file under parsing
* fix yamllint errors in doc section of cnos_vlan
* Fix errors reported by Sanity check using validate-modules
* change test playbook to include tasks for all modules
* fix additional pep8 errors
* more fixes, plus fix for python3
* fix for empty options section, removed unnecessary documentation
* fix up documentation section
* Correct options capitalization
* fix example section, add options
* Fix example section of the documentation
* Bug Fix for win_lineinfile and updated examples.
- changed $backrefs to a bool so it works with true/false/yes/no. This also fixes idempotency.
- Updated Docs with an example of using backrefs.
* Made suggested updates and converted two more parameters to "bool"
* Updated the Exception message
- Now contains the Windows Exception message as well as a custom message to help point in the right direction of a failed write.
* Updated Exception Handling
- Added Exception checks for Creating and removing the temporary files.
- Changed the ErrorAction on the copy tmpfile and remove tmp file to "Stop" to
cause the exception handler to catch all errors so we can fail gracefully
every time.
* resolve#21056 - Add support for full cloning. Fix some issues. Update doc
* Fix condition and update doc. Fixes#28585
* Using built-in helper for argspec, revert ansible metadata, add more control and remove type in documentation
* PEP8 style compliance
'#' and ';' are both valid comment chars for sysctl.conf files
according to the 'man sysctl.conf':
"Lines which begin with a # or ; are considered comments and ignored."
Fixes#20569
* removes unused code
* removes module_utils/local.py
* removes plugins/action/network.py
* removes action_handler from connection plugins
* removes code to use action_handler in task_executor
* updates action plugins to subclass from normal
The f5 module utils were using a file name that appeared to
conflict with the f5 python SDK's namespace. This patch just changes
the name of the included class to be f5_utils to avoid the issue
of namespace collisions
This completes the refactor of the nxos modules to use the persistent
connection. It also updates all of the nxos modules to use the
new connection module and preserves use of nxapi as well.
* updates all iosxr modules to support persistent socket
* adds iosxr action plugin to connect to device
* adds exec_command() to iosxr shared module
* fixes iosxr_config and iosxr_template local action
* update all unit test cases
* adds base test module for iosxr module testing
Don't try to create tags on a vpc that you've just removed.
Avoids
```
"msg": "An error occurred (InvalidParameterValue) when calling the CreateTags operation: You must specify one or more tags to create"
```
Although not quite sure why the `create_tags` was being called
as `module.params.get('tags')` *should* have returned `None`.
* Refactor E-Series AMG module to use module_utils
Refactor the NetApp E-Series module to utlize the common module_utils
and doc_fragments.
* Resolve a PEP8 issue with a missing newline
* Resolve compatibility issue with json import
* removes connection functions refactored into connection
* updates ComplexDict and ComplexList objects to use with AnsibleModule
* updates modules to add new argument to ComplexList & ComplexDict
* fixes issue with load_provider() not checking for an existing key
* adds updates to eos_config results key
* lots of minor syntax fixes in eos shared module
* adds eos_argument_spec to eos_eapi
fixes#21402
* Marks metadata files as outdated
Eliminates time records of the metadata and mirrorlists download
for each repository. This forces yum to revalidate the cache for
each repository the next time it is used.
* Command arguments in two separate strings to be compatible if run_command implementation changes. Doc explains a little better what is that parameter doing
* Added PubNub BLOCKS management module.
* . increased block start/stop wait to 30 seconds
* . fixed multi-line documentation
* . fixed YAML formatting in documentation section
* . removed multi-line commits
. fixed YAML format in description section
* . updated test script to upload event handler sources if non-local connection used for tests
. changed module configuration parameter from 'block' to 'name' (represent target block name)
. updated module docs regarding 'chanes' configuration parameter. Only block 'name' can be changed using this parameter ('description' can be changed directly in module call configuration)
. changed module configuration parameter from 'pwd' tp 'password'
. migrated 'urlencode' import from try..catch to six module imported from Ansible module utils
. removed custom method which is used to verify whether value is empty
* ^ fixed value for key-path function usage with names of application/keyset/block and handlers.
. reduced unnecessary requests (better pre-procesing of previous results)
. event handler name change won't trigger block restart
* ^ fixed too long documentation lines
* . moved PubNub BLOCKS client code into separate package under PyPi
. updated module code to utilize new package
. changed block start stop state to: started and started
* . small changes in documentation format
* Adding an elasticache snapshot module.
Allows user to create, copy, or delete a snapshot.
* Removing unnecessary function
* Make indentation uniform.
* Making requested changes.
Fixing PEP8
Adding a more graceful fail for delete() if the snapshot's state valid (such as when it is in the process of being created).
* PEP8
* Fixing some formatting
move imports
fix parameter alignment
* move imports to the top of the file below documentation
This patch enhances waiting operation of stateless VM to be down.
Because stateless VM creates a snapshot and removes it after the
VM is shutdown, we must wait until the VM is really prepared to
start again.
When loading the params in the local action, the provider key was
inadvertently being loaded as well. This created the circular
reference. The load_provider() method will now check for the provider
key and skip it when encountered.
fixes#21399
* Added Ordnance network module.
* Tidied up code base as per PR20436
* Whitespace blocking PEP8 test
* Removed acciental addition to VERSION
* Removed acciental addition to VERSION
* Documentation YAML issues
* removed force arg (depreciated)
* updates eos modules to use persistent connection socket
* removes split eos shared module and combines into one
* adds singular eos doc frag (eos_local to be removed after module updates)
* updates unit test cases
* adds conversion to command dict into ios shared lib
* fixes hardware commands in ios_facts
* adds network_os value to play_context in ios action plugin
fixes#21190
Replaces the usage of expanduser with the type 'path' for the
dest and object options as that functionality is available
in that type automatically.
patch related to #12263
The usage of type 'path' for the path option makes the use
of expanduser redundant. This patch removes the expanduser
call because the path type is already used for the path
option
* updates all vyos modules to use socket connection
* adds vyos local action handler
* adds exec_command() to vyos
* updates vyos_config local action
* update unit test cases
* add base class for testing vyos modules
* updates all ios modules to support persistent socket
* adds ios action plugin to connect to device
* adds exec_command() to ios shared module
* fixes ios_config and ios_template local action
* update all unit test cases
* adds base test module for ios module testing
* initial commit of cloudfront_facts.py
* modification as per review from @georgepsarakis
* fixed shippable build error
* fixed shippable build error
* removed wildcard imports and replaced with specific imports from ansible.module_utils.ec2 as advised by @georgepsarakis
* renamed all instances of cloud_front_origin_access_identity to origin_access_identity as advised by @georgepsarakis
* show facts based on alias and distribution id for easy referencing as advised by @ryansb. have done for both distribution and distribution_config
* fixed incorrect logic for default list_distributions, fixed list_distributions_by_web_acl - wasn't passing web_acl_id, fixed list_invalidations keyword args missing DistributionId
* fixed last fact added clobbering all previous facts for an alias or an id
* removed list_ prefix from list keys
* removed unnecessary boto fields. made list_distributions and list_streaming_distributions dictionaries with id/alias as key. fixed list_invalidations.
* initial commit of cloudfront_facts summary
* checks for empty list returned from boto, standardised list naming
* neatened up parameters
* added summary documentation
* refactoring of functions for modularity
* refactoring, neatening code, fix for if cname not present, added try-catch blocks
* more refactoring, cleaning
* more cleaning, allowed streaming distributions to be found by domain name alias
* removed unnecessary line
* fixed tabs
* fixed indentation
* removed trailing whitespace
* removed more whitespace
* more refactoring, modified where invalidations dict is set
* added ETag to summary
* refactored summary list
* moved list out of for loop
* trailing white space
* reverted line lengthening as advised by @willthames
* modified exceptions to multi line as advised by @willthames
* reverted variable spacing to be more pythonic'
* reverted spacing in YAML as advised by @ryansb
* reverted line spacing for parameters for correct blame attribution as advised by @ryansb
* removed white space
* more white space
* reverted line spacings for parameters as advised by @ryansb
* removed spaces between parameters as advised by @ryansb
* Avoid having module documentation links to itself
A lot of modules use M(own_module) in their documentation causing a link
in the documentation to itself.
* Make note more clear now
Add nsupdate module to manage DNS records on a DNS server
This uses dnspython library
It's greatly inspired by https://github.com/mskarbek/ansible-nsupdate with some rework, better feedbacks and documentation addition
Signed-off-by: nerzhul <loic.blot@unix-experience.fr>
* Make access_token type str, remove alias, and make validate_certs default value true
* Remove extra white space and add end of file newline
* Remove comma
* Try removing that whitespace again
* new module for private cert generation
* - changes based on the reviewer's comments
* - changes based on the reviewer's comments
* extra documentation per request
* Removing cmp to be compatible with Python3
* fix syntax
* Added an overlooked return
* Fixing making things overly complicated
* Simplifying since tags will always be hashable. Don't need to use cmp at all.
* Add swupd plugin
Add support for ClearLinux update manager (swupd)
Signed-off-by: Alberto Murillo Silva <alberto.murillo.silva@intel.com>
* swupd: Document RETURN values
Signed-off-by: Alberto Murillo Silva <alberto.murillo.silva@intel.com>
* swupd: Add a meaningful description for failures
Signed-off-by: Alberto Murillo Silva <alberto.murillo.silva@intel.com>
* swupd: Clarify documentation
Provide more information about the options supported by the module
since some concepts are new for people not used to clearlinux/swupd
Signed-off-by: Alberto Murillo Silva <alberto.murillo.silva@intel.com>
* Add NetApp SolidFire volume access group module
* Minor fixes
* Make requested changes
* Set supports_check_mode to True
* Add Ansible metadata
* Make requested changes
* Minor fix to documentation
* Initial version of aos_ip_pool module
* Add examples for IP Pool
* Break down ip_pool into smaller function
* Refactor do_load_resource
* Add get_display_name_from_file
* Add ‘src’ as an option to load ip pool from JSON file
* Rename directory network/apstra to network/aos
* Remove exception handling temporary
* Remove all ‘Exception as XX’ to be python 2.4 compatible
* Replace ‘== False’ with ‘is False’ for PEP8 Test
* Update documentation to be Yaml compatible
* Lisg all method imported from module_utils.aos
* Refactor to align with collection.find() changes
* Update examples by @gundalow’s recommendations
* Update Documentation per @gundalow’s recommendations
* Change the license per @gundalow recommendation
* Add exception handling for get_aos_session
* Change Auth format and add check_aos_version() to check minimum version
* Add a check for minimum version
* Refactor ‘src’ into ‘content’ to allow more options
Remove get_display_name_from_file in aos.py
Add content_to_dict in aos.py
* Fix variable name in do_load_resource
* Add mention of aos.py in module_utilities doc
* Add try/except for import yaml
* Add try/Except around main block of code and function
* Refactor to auto detect content_format, update doc accordingly
* Change create_new_ip_pool inputs
* Remove unused import
* Remove in_use as it’s never used
* Fix doc format
* Add version number in requirement doc
* Adding environment variable support for lambda.py in response to feature idea #20479.
Plus a 1-character bug fix.
* fix yaml syntax
* Fixing option name, adding alias, and fixing a line to allow the user to delete environment variables by setting an empty dict.
* Fix NetApp doc_fragment
* Add NetApp SolidFire Snapshot schedule manager module
* Minor fixes
* Change supports_check_mode to True
* Fix PEP8 issue
* Make requested changes
* Change 'pause' to 'paused'
* Add schedule ID as a returned parameter
* Make requested changes
* Refactor dimensiondata_network to use shared base class for common functionality.
* Experiment: remove the assignments in the "except ImportError:" block that keep PyCharm happy. If this fixes the build, then I reckon there's a bug in the validate-modules script (https://github.com/ansible/ansible/blob/devel/test/sanity/validate-modules/validate-modules#L322).
* Remove unused imports.
* Changes based on feedback from @gundalow for ansible/ansible#21043.
- Use no_log=True for mcp_password parameter.
- Collapse module parameter definitions.
* Use shared definitions and doc fragments for common module arguments (ansible/ansible#21043).
* Make default network plan "ESSENTIALS", rather than "ADVANCED" (this is consistent with our other tooling).
Tidy up module parameter documentation.
* Simplify dimensiondata module documentation fragments (didn't know you could include multiple fragments).
* Change 'verify_ssl_cert' module parameter to 'validate_certs'.
* fix#19487
* add 'version_added'
* Check for version compatibility, Ignore keys if incompatible
* add comment about version support
* remove 'type' as requested
* fix merge error
* Fix 'yum skips updates' bug
When the 'yum check-update' output is parsed, the regex used
to stitch wrapped lines together would fail on the first package.
It would fail because there is an empty line before the first
package, and this triggered the regex. To avoid a more complicated
regex, preprocess the check-update output to strip out any
empty lines.
The regex is also updated to include a group on the non whitespace
match to be used in the sub.
Add test cases based on info provided in the bug reports.
Fixes#20608
* known_hosts: support --diff
* known_hosts: support --diff also without --check
* Add unit tests and fix incorrect diff in one corner case
Tests are good!
* Refactor for readability
* Python 3 compat
* More Python 3 compat
* Add an integration test for known_hosts
* Handle ssh-keygen -HF returning non-zero exit code
AFAICT this is a bug in ssh-keygen in some newer OpenSSH versions
(>= 6.4 probably; see commit dd9d5cc670):
when you invoke ssh-keygen with -H and -F <host> options, it always
returns exit code 1. This is because in ssh-keygen.c there's a function
do_known_hosts() which calls
exit (find_host && !ctx.found_key);
at the end, and find_host is 1 (because we passed -F on the command line),
but ctx.found_key is always 0. Why is found_key always 0? Because the
callback passed to hostkeys_foreach(), which is known_hosts_hash(),
never bothers to set found_key to 1.
* This test does not need root
* Avoid ssh-ed25519 keys in sample known_hosts file
Older versions of OpenSSH do not like them and ssh-keygen -HF
aborts with an error when it sees such keys:
line 5 invalid key: example.net...
/root/ansible_testing/known_hosts is not a valid known_hosts file.
* Fix Python 3 errors
Specifically, the default mode of tempfile.NamedTemporaryFile is 'w+b',
which means Python 3 wants us to write bytes objects to it -- but the
keys we have are all unicode strings.
rollerwhrtn
John R Barker
Slezhuk Yevgeniy
Dag Wieers
Peter Sprygada
René Moser
Nathaniel Case
Barry Peddycord III
Matt Martz
Adrian Likins
Ricardo Carrillo Cruz
Gaurav Rastogi
Pavel Malyshev
Simon Li
Sloane Hertel
Dave Buckley
philsch
Kenny Gillen
molekuul
Kevin Kirsche
kuboj
camradal
Colleen Murphy
Helge Sychla
Benjamin Jolivot
Matt Clay
tomkitchen
Damien
Troy Ready
Brian Coca
scottb
Dhivyap
James Cooke
Ryan Brown
Pierrick Caillon
Veaceslav Mindru
Sebastien Lacoste-Seris
Paulo Matias
Ivan Bojer
Wayne Witzel III
Jordan Borean
Aliaksandr Kharkevich
David Norman
Trond Hindenes
Brian Coca
Monty Taylor
Zhuo Peng
Evgeni Golov
Ondra Machacek
Tom Melendez
Sumit Kumar
Ted Timmons
Tomas Tomecek
Will Thames
Dave Kasberg
johnnysheppard-isode
Abdoul Bah
Wilfrido Vidana
Daniel O'Brien
Tim Rupp
Alexander Turner
Gabriele
Michael Price
Dylan Silva
caio2k
Adrián López
Jiri Tyr
Sergey
Stepan Stipl
Loïc Blot
Robin Roth
Willem van Ketwich
aperigault
Ted
Tim Bielawa
Alberto Murillo
Robin Miller
Davis Phillips
Tatsuya Hoshino
stigchristian
DavidVentura
Adam Friedman
Tuomas-Matti Soikkeli
Ralph Rodkey
Marius Gedminas