Wow, this does not seem to be an uncommon misspelling. Might be there
are some left that span over two lines. I noticed the one in the git
module and then used `grep -rw 'the the'` to find some more.
Make git module support --separate-git-dir option. When git version is higher than 1.7.5, use built-in --separate-git-dir option during the clone. When lower, adjust the location of git dir manually after clone to achieve the same effect.
* [git] Fix fetching branch of shallow clone
* Use absolute file:// paths to make sure git uses shallow clones
* Improve tests
* Fix sanity errors
* Match style according to other (depth) tests
* Improve tests
Now they will fail without the fix of this PR
* Correct usage for shutil.rmtree
Fix adds correct usage of shutil.rmtree in git module
Fixes: #31225
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Include archive tests so they get run
* Use new include syntax
* Cleanup syntax on git tests
- use multi-line YAML
- remove unneeded {{ }} around vars in conditionals
- remove unneeded quotes
- add task file name to task names for easier troubleshooting when things fail
* Make archive tests work for RHEL/CentOS 6
The older versions of Jinja2 in RHEL/CentOS 6 required assertion tasks using the map filter to be skipped.
The older version of git required gzip compression to be skipped on RHEL/CentOS 6.
* Account for ansible_distribution_major_version missing
This reverts commit f8005d2737.
fix needs to be rethought as it applies to only newer git versions
and use of env shell breaks with non 'bourne compatible' shells
* Updates docs to match module behavior
* Updates docs to match module behavior
Updated using advice from jimi-c
* Removes snippet about git module before v1.8.3
At suggestion of robinro
* Only use `git verify-tag` when verifying annotated tags
The command `git verify-tag` only applies to annotated tags. When
verifying lightweight tags, which are more similar to non-moving
branches, one has to use `git verify-commit` instead.
Using ':' as a separator is appropriate since that is one of the
characters not allowed in a Git reference name.
See also https://www.kernel.org/pub/software/scm/git/docs/git-check-ref-format.html
* Improve testing of the Git module's gpg verification
All that is required to verify the signature is that the matching
public key is present in the remote user's keyring. There is no need
for GnuPG to explicitly trust the authenticity of the key.
Not Ansible specific, but rather the behavior of the `git verify-commit`
and the `git verify-tag` command line invocations.
There are too many possible special cases for Ansible to be able to
precheck known_hosts files without introducing all kinds of false
failures.
* Alternative known_hosts paths
* Alternative host name aliases
* ssh host certificates
* SSHFP + DNSSEC
Fixes#24860
* Fixes bug https://github.com/ansible/ansible/issues/22455 - Git reset fails when file with the name 'origin' is present in the repository
* #22455 Integration test for git module to test if it clones a repository with a file named origin
* Fixed yaml errors for test/integration/roles/test_git_clone/tasks/main.yml
* Removed the newly added target git and moved the code to test/integration/targets/git
* Reorganised code structure as per comments
* Fixed playbook name
* Added code that didn't make it to the playbook before.
* No longer need git.yml
* Remove non tasks specific code from tasks file and use existing variables
* Removed msg var from the vars.yml
Changes to the metadata format were approved here:
https://github.com/ansible/proposals/issues/54
* Update documentation to the new metadata format
* Changes to metadata-tool to account for new metadata
* Add GPL license header
* Add upgrade subcommand to upgrade metadata version
* Change default metadata to the new format
* Fix exclusion of non-modules from the metadata report
* Fix ansible-doc for new module metadata
* Exclude metadata version from ansible-doc output
* Fix website docs generation for the new metadata
* Update metadata schema in valiate-modules test
* Update the metadata in all modules to the new version
* Fixes#21316, add testcase based on this
* Add option `--branch NAME` to git clone command in case of branch or
tag in combination with depth=1
* This option should work back to at least git 1.8 and thus on all
supported distributions
* Provide better warning if depth is dropped
* Fix git remote url change detection.
When comparing paths, unfrackgitpath must be called on both sides
of the comparison. Otherwise comparisons involving symlinks will
return incorrect results.
* Re-enable git test on OS X.
* Return None from unfrackgitpath when path is None.
Wrap the fh.write(str) in b() to ensure the string is of the proper type in py2/py3. Otherwise, the following error occurs when using its ssh_wrapper:
An exception occurred during task execution. The full traceback is:
Traceback (most recent call last):
File "/tmp/ansible_8r299r6t/ansible_module_git.py", line 1049, in <module>
main()
File "/tmp/ansible_8r299r6t/ansible_module_git.py", line 928, in main
ssh_wrapper = write_ssh_wrapper()
File "/tmp/ansible_8r299r6t/ansible_module_git.py", line 330, in write_ssh_wrapper
fh.write(template)
TypeError: 'str' does not support the buffer interface
* Fix UnboundLocalError remote_head in git
Fixes#5505
The use of remote_head was a leftover of #4562.
remote_head is not necessary, since the repo is unchanged anyway and
after is set correctly.
Further changes:
* Set changed=True and msg once local_mods are detected and reset.
* Remove need_fetch that is always True (due to previous if) to improve
clarity
* Don't exit early for local_mods but run submodules update and
switch_version
* Add test for git with local modifications
Sets the SSH option `IdentitiesOnly=yes` in the SSH wrapper when a
`key_file` is provided to the git module. This option ensures that
the provided key is used. Otherwise, the system's ssh-agent could
provide undesired identities when connecting.
From ssh_config(5):
> Specifies that ssh(1) should only use the authentication identity and
> certificate files explicitly configured in the ssh_config files or
> passed on the ssh(1) command-line, even if ssh-agent(1) or a
> PKCS11Provider offers more identities. The argument to this keyword
> must be “yes” or “no”. This option is intended for situations where
> ssh-agent offers many different identities. The default is “no”.
* Use the `to_native` conversion method to convert a command output to the
appropriate form when looking for branch names in the command output,
therefore avoiding a `TypeError` in Python 3.
Comparing to the output of run_command() needs to use native strings
Also fix imports: We were relying on them coming from the import of
basic. A few (like yaml) weren't imported at all.
This fixes a bug where the module fails to verify tags. I added a conditional statement in `verify_commit_sign()` that checks if `version` argument is a tag, if so, use `git verify-tag` instead.
* remove redundant if submodules_updated
* speed up git by reducing remote commands
* run fetch only once
* run ls-remote less
* don't run ls-remote if one would run fetch anyhow
* remove unnecessary remote_branch check in clone
* kept if depth and version given
* fix fetch on old git versions
On python3, we want to use the surrogateescape error handler if
available for filesystem paths and the like. On python2, have to use
strict in these circumstances. Use the new error strategy for to_text,
to_bytes, and to_native that allows this.
♫ Christian Krause ♫
Zhikang Zhang
Senya
Martin Krizek
Bryan Black
Alan Rominger
Dag Wieers
Maarten Bezemer
Abhijeet Kasurde
Kevin Burke
Brian Coca
Laurent Coustet
Brian Coca
Toshio Kuratomi
Arthur Burkart
Andreas Olsson
Andreas Olsson
Robin Roth
Chulki Lee
Miyurz
Robin Schneider
Robin Roth
Matt Clay
Baptiste Mille-Mathias
tedder
Rob Cutmore
Fabio Alessandro Locati
David Wittman
Sam Doran
Fahri Cihan Demirci
Robin Roth
Jamie Evans
John R Barker
Toopy