When only looking at the failed state of the TaskResult, certain failures
cause the linear strategy to fail out sooner than it should and not execute
the always portion of blocks.
Fixes#24301
* Add ios changes for Python3
Make `execute_command` arguments and its
return value complaint to PY3 changes
made in PR #24431
pep8 fixes
* Fix CI issues
* Fix review comment
* Add sros changes for Python3
Make `execute_command` arguments and its
return value complaint to PY3 changes
made in PR #24431
Code cleanup
pep8 fixes
* Fix CI issue
* Add vyos changes for Python3
Make `execute_command` arguments and its
return value complaint to PY3 changes
made in PR #24431
pep8 fixes
* Fix CI issues
In _process_pending_results (strategy/__init__.py), we were using the delegate_to
field directly from the original task, which was not being templated correctly.
As an alternate to #23599, this patch instead pulls the host name out of the delegated
vars passed back in the task result dictionary to avoid having to re-template things.
Fixes#23599Fixes#20508
On Python3 and Python2 use pickle slightly differently so we need to be
explicit about some things.
If pickles could be shared between python2 and python3, as in
ansible-connection and the pickle cache, we need to specify the protocol
to use when dumping and the encoding to use for byte strings when
loading.
The dumping protocol needs to be no higher than 2 as python-2 only
supports up to protocol 2. The encoding should usually be 'bytes' so
that python2 str type becomes python3 bytes type. However, doing this
means that we must make sure that the objects being serialized properly
make their strings into text strings except when they're supposed to be
bytes. If strings are improperly byte strings, they may cause
tracebacks on the receiving end
Fix for persistent connection plugin on Python3. Note that fixes are also needed to each terminal plugin. This PR only fixes the ios terminal (as proof that this approach is workable.) Future PRs can address the other terminal types.
* On Python3, pickle needs to work with byte strings, not text strings.
* Set the pickle protocol version to 0 because we're using a pty to feed data to the connection plugin. A pty can't have control characters. So we have to send ascii only. That means
only using protocol=0 for pickling the data.
* ansible-connection isn't being used with py3 in the bug but it needs
several changes to work with python3.
* In python3, closing the pty too early causes no data to be sent. So
leave stdin open until after we finish with the ansible-connection
process.
* Fix typo using traceback.format_exc()
* Cleanup unnecessary StringIO, BytesIO, and to_bytes calls
* Modify the network_cli and terminal plugins for py3 compat. Lots of mixing of text and byte strings that needs to be straightened out to be compatible with python3
* Documentation for the bytes<=>text strategy for terminal plugins
* Update unittests for more bytes-oriented internals
Fixes#24355
Template can take a directory as the destination. When that's the case,
we need to diff between the source and the file inside of the directory.
That happened when the directory was specified with a trailing slash but
not when it was specified on its own. This change fixes that.
Fixes#24413
For playbook base objects, when dumping attributes via dump_attrs() an
attribute like loop_control is a class. Using the default serialization
for these is slow and consumes a lot of memory. Since LoopControl is also
based on the Base class, we can use serialize() instead and save a lot of
resources.
This also adds a from_attrs() complimentary method to nicely turn the
dumped attrs back into proper field attributes.
Fixes#23579
* Create netconf_config.py
To support new attribute 'src' for the netconf_config module.
Cross-check with #24323
* Update netconf_config.py
* Update netconf_config.py
template/__init__.py imported unsafe_proxy from vars which caused
vars/__init__.py to load. vars/__init__.py needed template/__init__.py
which caused issues. Loading unsafe_proxy from another location fixes
that.
Added an integration test for fetch module idempotence. (Testing
that validate_checksum is doing what it's supposed to is harder as we'd
have to create a race condition with the downloaded data to trigger it.
Probably need to make that a unittest eventually).
Also give a deprecation message to the validate_md5 parameter so that we
can eventually get rid of it.
We have a list of specific messages that we scree-scrape and flag
them as legit errors.
However, we also have a catch-all regex that matches everything
starting with %.
That can cause issues on commands that return lines with that
character, like for example the 'crypto key generate'.
Fixes#23770
This addresses a problem where the action plugin would ignore the
remote_addr value for the host. In this case, only the inventory values
for the hostname would be considered and populate the remote host
remote_addr value for the connection plugin.
* Check for provider values inside check_args of respective network code
* Partial revert of b9ee5aa
The no_log change is okay, but take out the action result munging
When retrieving file contents for diffing we need to get the contents as
binary. Otherwise python3 will try to convert the file to text and fail
with non-decodable contents.
Fixes#23171
Copy module was walking over files in subdirectories repeatedly (a
directory tree a few levels deep could bring the time spent into the
tens of minutes)
This was traced to the fix for this bug report: https://github.com/ansible/ansible/issues/13013Fixed#13013 a different way and added an integration test to check for
regressions of #13013 as we optimize this code.
Fixes#21513
Ansible will now automatically retry a connection if SSH returns an error:
mux_client_hello_exchange: write packet: Broken pipe
This is probably a bug in SSH, but because it's safe to retry this
connection there is no need for Ansible to fail because of it.
We were hard-coding the protocol, port and validate_certs on
eos EAPI via the action plugin.
Put defaults on the eos_argument_spec and pull those values from it.
* 'unable to open shell' -> direct to web help
The "unable to open shell" error is returned for a number of different,
direct people to online docs (we we can update out of band of releases)
to guide them though the various solutions.
* fix pep8 errors
The password_hash filter will generate a salt value if none is supplied.
The character set used by Ansible
(upper & lowercase letters, digits)
did not match that used by libc crypt
(upper & lowercase letters, digits, full stop, forward slash).
This resulted in a slightly smaller key space, and hence hashes would be
slightly easier to attack (e.g. by dictionary, brute force).
* Ansible 2.3 feature support for dellos6.
- With the new Ansible 2.3 infra changes, the dellos modules doesn't work
(the new infra changes are not backward compatible), so added the below
changes support it.
- Added the new terminal plugin for DellOS6
- Added the new action plugin for DellOS6
- Modified the modules to work with the new infra.
- with that it adds support for DellOS6 Persistent Connection support.
* Remove pep8 confirming files from dellos6.py and dellos6_config legacy-files
* fix 'sequence' lookup shortcut syntax and documentation
* Update playbooks_loops.rst
Minor edits for grammar and clarity.
* Update playbooks_loops.rst
Another tweak for clarity.
The fix for leading junk in sudo output: fee6e29 causes problems with
ssh + sudo. On the initial connection using ControlPersist, the output
that we scan for the prompt contains both the command we're sending to
configure the prompt and the prompt itself. The code in fee6e29 ends up
sending the password when it sees the line configuring the prompt which
is too early.
Switch to a version that splits on lines and then checks whether the
first or last line starts with the prompt to decide if it's time to send
the password.
Fixes#23054
References #20858
The pass prompt expects an answer and compares a `str` to a binary buffer, thus crashing.
It's an obvious fix to help transitioning towards Python3 and hopes it does not need a specific test.
* Fix a couple issues in synchronize with docker
* Make the rsync_opts parse as a list using the same criteria as
module_utils argumentspec parsing
* Do not quote arguments in the action plugin. The module will quote as
it knows whether it will invoke rsync with a shell or via exec.
Fixes#23046
* Ansible 2.3 feature support for dellos9 and dellos10
* Use Persistent Connection Manager
* Fix CI issue, revert the doc and metadata changes
* Reverted the meta_info (supported_by) to community from core
* Fixed the CI issues, use module_utisl.six and updated legacy-files
* fixes action handlers for sros
* fixes sros_config module execution to use AnsibleModule
* fixes sros_command module to use socket connection
* adds sros to constants
* fixes#15770
* When running under the UTF-8 codepage, Powershell subprocesses will fail (eg, Start-Job, others) if the input encoding is using the default BOM preamble. This fix forces it to use no preamble in leaf_exec and win_shell, and includes tests to verify that Start-Job works.
This change to the template action plugin make template use the
platform's native newline_sequence for Jinja.
We also added the option `newline_sequence` to change the newline
sequence using by Jinja if you need to use another newline sequence than
the platform default.
This was previously discussed in
https://github.com/ansible/ansible/issues/16255#issuecomment-278289414
And also relates to issue #21128
* fixes#22441
* fixes#22655
* moves all env handling into the exec wrapper; this should work for everything but raw, which is consistent with non-Windows.
* Update module_utils.six to latest
We've been held back on the version of six we could use on the module
side to 1.4.x because of python-2.4 compatibility. Now that our minimum
is Python-2.6, we can update to the latest version of six in
module_utils and get rid of the second copy in lib/ansible/compat.
The base64 stdlib functions require byte strings. So we have to
transform the strings into bytes before handing to the stdlib and then
transform them back into text before handing back to ansible.
Fixes#22873
The junos action handler was not honoring the host value in the provider
argument. This patch will now use the provider host entry if it exists
and falls back to the inventory hostname
Made ansible-doc more plugin agnostic
We can have docs in lookup, callback, connectionm strategy, etc
Use first docstring and make pepizis happy
generalized module_docs to plugin_docs
documented cartesian, ssh, default, jsonfile, etc as examples
changed lack of docs to warning when listing
made smarter about bad docstrings
better blacklisting
added handling of options/config/envs/etc
move blacklist to find_plugins, only need once
* ensure exit_json does not fail from stderr=False
- do a little bit of safety-checking in exit_json to not try to .splitlines() on a boolean
- remove the stderr=boolean from uri.py, this is the only spot that uses it (at least so obviously)
- add unit tests that call exit_json. These are useless because the stderr parsing is in _execute_module and is difficult to mock; deleting these tests after the commit.
* remove added unit tests per prev commit
exit_json doesn't do the param parsing, that is buried deep inside _execute_module.
James Cammarata
Matt Martz
Ganesh Nalawade
Toshio Kuratomi
Jan-Piet Mens
Brian Coca
wiso
Matt Davis
Brian Coca
Nick Piper
Nathaniel Case
Erwin Lang
KeepZero
Trishna Guha
Ricardo Carrillo Cruz
Antoine Cotten
Peter Sprygada
Senthil Kumar Ganesan
Chris Alfonso
Strahinja Kustudić
Matt Clay
John R Barker
Will Thames
Alex Willmer
Konstantin Suvorov
Victor Perron
Dag Wieers
Adrian Likins
Evgeni Golov
Ted Timmons