* Fix junos_config confirm commit issue
Fixes#40626
* Due to issue in ncclient commit() method for Juniper
device (ncclient/ncclient#238)
add a workaround in junos netconf plugin to generate proper
commit-configuration xml and execute it using ncclient
generic `rpc()` method.
* Update junos_config doc
* Add run_commands api for ios and vyos cliconf plugin
* Add run_commands api to ios and vyos cliconf plugin
* Refactor ios and vyos module_utils to check return code
in run_commands
* Fix Ci failures
- Comparison was not happening properly as it lacked full data
- Module now creates a full data structure on payload
- Defaults to America/Los_Angeles as that's what Meraki seems to do
* vyos and ios cliconf plugin refactor
* Refactor vyos cliconf plugin
* Change vyos module_utils and vyos_config as per refactor
* Minor changes in ios cliconf plugin
* Fix unit test failure
* Fix sanity issues
* Add get_diff to rpc list
* Initial commit for meraki_switchport module
- Query or modify swichport configurations
- Further optimizations are available
- Integration tests will require manual editing of file for others
* Remove blank lines
* Implement configuration template management
- Queries or removes templates
- Can bind or unbind templates to networks
- Module is idempotent only for binding and unbinding
- Meraki does not allow template creation via API
- Integration test is tedious b/c previous bullet point
- Fixed bug in construct_path() so it won't set self.function
* PEP8 changes
* Re-enable some integration tests, use variables, and fix broken code
* Initial commit of meraki_vlan module
- Create, delete, modify, and query VLANs within a network
- Support for all allowed objects in the VLAN data structure
- Meraki defaults networks to have VLANs disabled and there is no
way to use the API to enable VLAN support. It must be enabled
manually.
* Fix formatting error in documentation
* Formatting changes and added documentation
* PEP8 fix
* Initial commit for meraki_device module
- Allow claiming, removal, updating, and querying of devices
- Integration tests are included
- Integration tests are not complete because physical gear is required
- Integration tests also require Meraki subscriptions
* Added support for serial number query without network
* Added support for net_id and net_name
* Changes recommended by ansible-test for PEP8 and documentation
* Remove duplicate state in example
* Fix typo
* add example using peer keepalive vrf and delay restore
<!--- Your description here -->
add example using peer keepalive vrf and delay restore
+label: docsite_pr
+label: issue ansible/community#311
* Update nxos_vpc.py
update task name to include "existing"
* Changed request() to run json.loads() instead of module doing it
- Removed json.loads() from modules
- Removed some unreliable integration tests
- Removed self.function setting in construct_path()
-
* PEP8 changes
* Remove debug line for push
* Refactor ios cliconf plugin and ios_config module
* Refactor ios cliconf plugin to support generic network_config module
* Refactor ios_config module to work with cliconf api's
* Enable command and response logging in cliconf pulgin
* cliconf api documentation
* Fix unit test and other minor changes
* Doc update
* Fix CI failure
* Add default flag related changes
* Minor changes
* redact input command logging by default
* diff in as-path-set or prefix-set
* fix caveat diff can not have last line with comma in prefix-set/as-path/community-set
* Simplify fix to include indentation before parse
* remove debugger
* route-policy diffs
* fix iosxr_config crash issue
* new changes in iosxr_config after git add
* end-policy-map and end-class-map are properly indented so match misplaced children only when end-* is at the beigining also fix pep8
* Remaining config blocks of route-policy which needs exclusion from diff. added new tests
* pylint/pep8 warnings
* Review comments , sanity test fix
* shbang warning
* remove unused import
The parent parameter was not being used in the module. This meant
that all child profiles would use the system-defined parent instead
of the parent specified in the module
Fixes: #40631
The module was not correctly handling a certain state where the node
could be down, but the monitor was enabled on the node.
This patch fixes it.
* Fixes ios_logging idempotency issues
* Added intergration tests & minor fixes
* Minor fixes in tests
* Minor fixes in tests #2
* eos_logging fixes after PR review
* Adding changed option to save_when for aireos
* Deprecating save option for aireos_config.
* Updating version_added to 2.7 since the PR missed the window for 2.6
* Remove 1.1.1.1 from *_config tests
* remove from *_smoke and *_system
* Miscellaneous other tests
* Remove from module documentation as well
* Remove from unit tests as well
* Remove accidental duplication from rebase
* Do not gather mem facts if command invalid
In some firmwares, 'show memory statistics' fail, thus
do not populate mem if we got a failure after running that command.
* Fix pep8
* Warn if got error when running 'sh memory statistics'
* Fix pep8
* nxos_vlan fix
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* uncomment mode test as nxapi now has get_capabilities
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Add nxos_install_os integration tests
* Update call to check timers
* Update check_ansible_timer method
* Modify network_cli integration tests
* Add timer check for nxos_install_os
* Add comments for clear_persistent_sockets
* Update connection info for tests
* More updates
* Restructure files for provider and non-provider testing
* Update env var name and add check for ISSU switchover
* Initial commit for meraki_admin module
* Initial commit for meraki_snmp module
* Update code to be operational for SNMP settings
- Add optional_ignore value to is_update_required for one-time fields
- Write documentation
- Perform checks and execute changes
* Minor fixes and test improvements
- Fix some documentation errors
- Implement and test for idempotency
* Removed meraki_admin which shouldn't be there, ansibot changes
* Rename params to be lower case
- Updated integration tests
- Changed CamelCase to lowercase and underscore
* Code cleanup changes based on comments from Dag.
Without this change, the module will simply fail with an error when
doing a query and not specifying the **lag_type** parameter.
The integration tests expect **lag_type** too, so this simply codifies
what was expected since inception.
* New ansible module netconf_rpc
* add integration test for module netconf_rpc
* pep8/meta-data corrections
* usage of jxmlease for all XML processing
separation of attributes "rpc" and "content"
* removed unused imports
improved error handling
* fixed pep8
* usage of ast.literal_eval instead of eval
added description to SROS integration test for cases commented out
Change the command to get the interface in a vlan "show vlan" => "show vlan brief"
Change the parsing of the return command of the switch.
The return of the ios command is fixed so i cut with fix number of carracter.
Adding looking for the next line to add the forgeted interfaces.
* Return messages generated from edit_config to module
* This does not seem to work that way
* Change test IP addresses to not conflict with device config
* HTTPAPI connection
* Punt run_commands to cliconf or httpapi
* Fake enable_mode on eapi
* Pull changes to nxos
* Move load_config to edit_config for future-preparedness
* Don't fail on lldp disabled
* Re-enable check_rc on nxos' run_commands
* Reorganize nxos httpapi plugin for compatibility
* draft docs for connection: httpapi
* restores docs for connection:local for eapi
* Add _remote_is_local to httpapi
* Add setup ignore_errors for nxos_config test
* Fix parse_fan_info for n3k
* Skip bidir tests for N3k
* Omit vni config for n3k
* Skip unsupported nxos_vrf_af test on N3K
* Add legacy N3K platform tag
* Modifying cnos-facts, cnos_command and cnos-config in line with the design followed in Ansible. Adding unit test cases for these modules. Added plugins to support them.
* Removing doc fragment conflicts with other modules
* Replacing show with display
* Correct answer example as 'c' cancels, not confirms. Moved command note to be in line with command docs.
* Correct example to escape square brackets. Remove '\r' mention as it does not get passed correctly.
* Add carriage return example since it works with double quotes.
* Remove colon which was breaking docs rendering.
* Changing Lenovo Inc to Lenovo and update License file to be consistent.
* Editing cli commands to expanded form. Changing username and password fields as per Ansible standards.
* Initial commit
* Socket Timeout and dest file handler
* sftp handling
* module name change as per review
* multiple thread tmp file overwite problem
* Integration test suite for network_put
* add additional testcase for dest argument
* fix pylint/pep8/modules warnings
* add socket timeout for get_file
* network_get module
* pep8 issue on network_get
* Review comments
* New module for CRUD functionality of networks in a Meraki environment
- Relatively full integration test suite
- More functions to come
* Fix indent for PEP8.
- Look into why this didn't show on a local PEP8 test
* Dag requested changes.
- Removed a section in get_net as its backend isn't implemented
- Documentation modifications
* Improved integration testing and results
- Added get_org() function to return data for single org
- Added a lot of new integration tests
- Changed result now shows, still probably could be better
* Fix formatting errors for PEP8
on networktocode slack there was a user that wanted an example of how to add a switch vlan interface. This will work and was tested on a 3850 cisco ios switch
Added detection of additional formatting for domain_name, domain_search,
lookup_source, and lookup_enabled on some software versions. In each
case they failed to detect existing commands with a '-' in it.
Fix: #38301
* Add members to bigip_gtm_pool
* Add monitors to bigip_gtm_pool
* Add availability_requirements to bigip_gtm_pool
* Refactor bigip_gtm_pool
* Normalize the product value returned by gtm facts
* Corrected various documentation
* Updated various F5 coding conventions
* Add partition to bigip_static_route
* Added more unit tests
* Refactor bigip_gtm_virtual_server
* Add translation_address to bigip_gtm_virtual_server
* Add translation_port to bigip_gtm_virtual_server
* Add availability_requirements to bigip_gtm_virtual_server
* Add monitors to bigip_gtm_virtual_server
* Add virtual_server_dependencies to bigip_gtm_virtual_server
* Add link to bigip_gtm_virtual_server
* Add limits to bigip_gtm_virtual_server
* Add partition to bigip_gtm_virtual_server
* Fix bigip_gtm_server to correctly create other server types
* Add type to virtual_server
* Add address_translation to virtual_server
* Add port_translation to virtual_server
* Add ip_protocol to virtual_server
* Add firewall_enforced_policy to virtual_server
* Add firewall_staged_policy to virtual_server
* Add security_log_profiles to virtual_server
* Removed forwarders parameter that did not work
* Updated coding conventions
* Added ssl_cipher_suite and ssl_protocols to bigip_device_httpd
* Added more unit tests
tstoner
Trishna Guha
Ganesh Nalawade
Dave Thelen
saichint
John R Barker
Matthew Stone
Kevin Breit
permitanyany
Nathaniel Case
Tim Rupp
Sumit Jaiswal
Deepak Agrawal
Lindsay Hill
Nilashish Chakraborty
wiso
Chris Smolen
Sam Doran
Michael Doyle
epicanthal
Jackson Isaac
Anil Kumar Muraleedharan
James Mighion
Ricardo Carrillo Cruz
Mike Wiebe
rhorer
Dag Wieers
pierremahot
eoprede
Matt Clay
suacide24
Tyler Bigler
Sean Cavanaugh
Eric Thiel
Jaak Ristioja
Jon Dufresne
Jacob McGill