Previously, when the active SELinux value was the same as the desired value, regardless of the value of `persistent`, the module would simply exit successfully, assuming no need for update. This made the assumption that the active and persistent values should be the same, but that is not always the case. This modification treats both the active and persistent values separately when checking for the need to update. Note that the persistent update mode, however, will still update the active as well as the persistent value. If this is not desired, it is possible to separately toggle the active value alone.
Other changes:
* Make the check mode actually perform checks for changes
* Organizes semanage commands into set of logical steps
* modules/systemd: fix logic: allow scope to default to 'system'
Fix logic introduced in 7ea909418e5: if 'scope' param is not specified,
it defaults to system, but the value of module.params['scope'] is None,
not 'system' - so allow for that.
* modules/systemd: fix logic: disabled means disabled
Fix logic determining whether a service with both systemd and initd files is enabled or disabled.
In situations where systemd thinks service is disabled, but rc.d symlinks mark it as enabled,
this module wrongly assumes the service is enabled.
Fix this logic: disabled means disabled
Only when the output from does NOT include disabled, consider the status of rc.d symlinks.
This essentially replicates the fixes done to the systemd handling in the "service" module in 3c89a21e0cFixes#22303Fixes#44409
<!--- Your description here -->
The documentation states the use of the "value" attribute for environment variables while this should also be the "job" attribute.
+label: docsite_pr
* Add definitive to valid_simple_controls in pamd module
* Add changelog fragment for issue 44278
* Adjusted module name to not include path or extension
* Check if service is already masked
Newer versions of Systemd now report a 'LoadError' when the unit file
is masked. This causes the play to fail with an error stating that the
service is already masked.
Now the systemd module checks if the service is masked and doesn't
fail if it's masked and LoadError is reported.
Fixes issue #42384.
* Remove useless parens
This PR includes:
- Removal of maintainers that are listed as author in the module
- Removal of entries that do not extend the original author list
- Move ignored-statement to namespace/directory (where useful)
- In some cases, fix the authors-list or add missing github id
We end up with a list of exceptions/additions and a large set of
namespace/directory maintainers or team of maintainers.
Some entries could be further improved by discussing with some
maintainers.
* Update docs
* Add reboot action plugin
Refactor win_reboot so it is subclassed from reboot
* Use new connection methods
* Test fixes
* Use better uptime command for Linux
Use who -b to get the last time the system was booted rather than uptime, which changes every second.
* Use distribution specefic commands and flags
Query the managed node to determien its distribution, then set the appropriate command and flags.
* Tune debug messages a bit
* Update module docs with details about pre_reboot_delay
s docs
* Ensure that post_reboot_delay is a positive number
* Remove the stringification
* Add integration tests
* Make sure aliases are honored
* Handle systems that have an incorrect last boot time
SystemD and fakehw-clock do not properly set the
last boot time and instead always set it to epoch.
Use a different command if that is the case.
* Copyright and encoding fixes
* Minor fixes based on feedback
* Add exponential backoff to sucess check method
* Update integration test
Skip the integration test if it would try to reboot the control node. We need a new mechanism to account for this scenario in ansible-test, so tests must currently be run manually for this plugin.
* Update integration test
Skip the integration test if it would try to reboot the control node. We need a new mechanism to account for this scenario in ansible-test, so tests must currently be run manually for this plugin.
* Fail early with running with local connection
* Update docs based on feedback
* minor refactoring, state mgmt changes
When creating a new account, check to see if the expiration parameter is negative and pass in the appropriate parameter. Since the negative integer passed into expires is converted to time.struct_time which in turn gets converted to a formatted time string when passed to the underlying command, a -1 or large negative number would result in passing a date before 1970-01-01 to the underlying command.
This had the opposite effect of creating an account with no expiration account resulting in a newly created account that was already expired, or just throwing an error on certain systems.
Wow, this does not seem to be an uncommon misspelling. Might be there
are some left that span over two lines. I noticed the one in the git
module and then used `grep -rw 'the the'` to find some more.
This allows to parse the output when the user's locale changes the
commands' output. For example chkconfig uses 'Ein' and 'Aus' instead of
'on' and 'off' when using LANG=de_DE.UTF-8 breaking the service
detection on RHEL 6.
* New boto3_facts module
boto3_facts aims to help users see whether their python and module
versions are as expected.
* Rename to `assert_python_requirements`
* Update integration tests
* Document options
* fix imports
* boilerplate
* fix docs
* reorder import
* Make distutils optional and fail gracefully when it is not available
* fix example doc
* fix docs on requirements_facts
* Add backup option
* Only backup shadow file when the OS has one
* Only backup shadow file for SunOS
* Update docs on backup feature
* Add changelog fragment
* Add tests for shadow backup
* Remove backup option, make it automatic
Remove the option to enable/disable backups and make it automatic. Add note to docs describing this behavior.
Change tests to account for new module behavior.
Change section name in changelog fragment since minor_features is not a valid section.
* strip additional comments from /etc/default/passwd
Strip trailling comments from /etc/default/passwd like
MINWEEKS=1 #MINWEEKS=2
MAXWEEKS=12 # MAXWEEKS=8
Which otherwise cause failures with "failed to read /etc/default/passwd: too many values to unpack"
* fix carriage return typo in commit
* yet another typo in commit
* Fix indent problem
* add changelog fragment for PR 43931
* 29891 use os.path.realpath to follow keyfile symlinks
* 29891 add parameter follow
* updated changelog fragment
* add documentation and set default to false
* Check the password format
Check the password format and notify user if they
input unencrypted password.
* Fix sanity error
* Add integration test
* Missed a task name
* Hard code the testing password
Since some testing platfrom has no passlib installed
* Add changelog fragment
* Rework some English sentences
* Fix a grammar mistake
Fixes#42310
Previously, the firewalld module was making a call to
FirewallClientConfig.getZoneNames() which doesn't exist in versions
of firwalld older than 0.4.2, this patch implements the same logic
with older API calls to not require a newer version of firewalld.
Signed-off-by: Adam Miller <admiller@redhat.com>
* Remove use of simplejson throughout code base. Fixes#42761
* Address failing tests
* Remove simplejson from contrib and other outlying files
* Add changelog fragment for simplejson removal
* Added changes for Issue #38828, adds scope paramater to systemd module
* Removed description for old paramater
* Added version_added field for new option
* Readded the user paramater as a deprecated paramater
* Changed version for the scope paramater since I missed the release window
* Documentation change for resizefs
Changed documentation to match the default value of resizefs set in the code.
Added a note on the resizefs use on the example utilizing it.
* Remove test now it validates fine
* Detect failed sysvinit module
- This checks the stderr instead of the rc to detect whether the
sysvinit module was successful or not, as even when failing, the
rc would be 0.
- It immediatly became obvious that the debug info when failing
was far too little to properly debug the role. To improve this,
I also added the rc, stderr and stdout to the debug output.
* Revert stderr check to rc check, rename out->stdout, err->stderr
* Only report change when home directory is different
Add tests with home: parameter
Have to skip macOS for now since there is a bug when specifying the home directory path for an existing user that results in a module failure. That needs to be fixed in a separate PR.
* Do not compare result to unset parameter in sysvinit module
* Fix misformed command in sysvinit module
* Small None-comparison style fix in sysvinit module
* fix a (forgotten?) change in moving createhome -> create_home
Fix for following bug on FreeBSD host whith user module:
```
fatal: [webssp]: FAILED! => {"changed": false, "module_stderr": "X11 forwarding request failed
Traceback (most recent call last):
File \"/tmp/ansible_2rmlBl/ansible_module_user.py\", line 2487, in <module>
main()\n File \"/tmp/ansible_2rmlBl/ansible_module_user.py\", line 2426, in main
(rc, out, err) = user.modify_user()
File \"/tmp/ansible_2rmlBl/ansible_module_user.py\", line 1011, in modify_user
if (info[5] != self.home and self.move_home) or (not os.path.exists(self.home) and self.createhome):
AttributeError: 'FreeBsdUser' object has no attribute 'createhome'
", "module_stdout": "", "msg": "MODULE FAILURE", "rc": 1}
```
It happenned with 'createhome' AND with 'create_home' form, with python 2.7 AND python 3.6
* Add changelog
Co-authored-by: dgeo <dgeo@users.noreply.github.com>
* Add additional puppet options
Add support for puppet options --debug, --verbose, --summary,
and extend logdest to support logging to stdout and syslog at
the same time.
Fixes issue: #37986
* Fix docs
* Doc fix, add release note
* Fix silly yaml error
* Correct changelog, add C() to params in doc
* pamd: typo fix sufficicent->sufficient
* pamd: is_valid is a property, not a method; return a tuple
* pamd: define is_valid for all PamdLine classes
* pamd: use validate() for verbose errors, define generically
* pamd: PamdRule: rule_control is always str, use _control
Fixes https://github.com/ansible/ansible/issues/41179
* add notes to service_facts about accessing fact data
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove unquoted :
Signed-off-by: Adam Miller <admiller@redhat.com>
* service_facts correct meaning of state for systemd service units
Fixes#40809
Previously this module used the commend `systemctl list-unit-files
--type=service` to query state of services but list-unit-files only
shows enabled vs disabled which is not what we want for "state"
Signed-off-by: Adam Miller <admiller@redhat.com>
* make sure to define service_name before referencing it
Signed-off-by: Adam Miller <admiller@redhat.com>
* Add a module to create a java key store (jks) from a certificate
* Create a jks from a certificate and a private key (secured by a password)
* Add an option to recreate the jks (useful when you want to update the jks password)
* If the certificate changed, recreate the jks
* Version added is now 2.7
* Fixed check_mode status to be the same as normal execution
* Now when setting the status to `disabled` in check_mode it correctly
returns the state changed and prints a warning like it does in normal
model. Before it always returned changed even if everything was set
correctly and a reboot was required.
* Add changelog entry
Co-authored by: Strahinja Kustudic <kustodian@gmail.com>
* The module now correctly sets the timezone in both the config file and
in /etc/localtime; while hwclock is set in both the config and
/etc/adjtime.
* Module checks if the timezone is actually set by checking
/etc/localtime. Before it only checked if it was set in the config file.
* Fixed module not setting the timezone on RedHat systems if
/etc/localtime was a symbolic link.
* Fixed module failures in case of missing config files or incorrect data
in them.
* Added a lot of integrations tests to cover most of these situations.
* Add documentation for setting multiple options.
* Do not set `cluster' to myhostname, if cluster is not set. This will cause
parse error, since module will try to parse the brick and hosts.
* Also fixes issue #40410
* parted module not idempotent for esp flag and name
Fixes#40452
Currently the parted module doesn't take into account names with
spaces in them which leads to non-idempotent transactions on the
state of the system because the name comparison will never succeed.
Also, when the esp flag is set, parted infers the boot flag and the
parted module did not previously account for this. This lead to
non-idempotent transactions as well.
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix unit tests, expected command changed in the patch
Signed-off-by: Adam Miller <admiller@redhat.com>
In the last commit I modified the code to run commands when they are
daemonized. But the execution of "chkconfig" is not daemonized so it
uses "self.module.run_command(cmd)".
This commit set the default localize to allow proper screen scraping of
chkconfig command.
* Do not join flag parameters
This put a comma between every character of the tcp flag parameters, resulting in a bad iptables command.
Fixes#36490
* Use suboptions to ensure tcp_flags options are lists
* Add unit tests for tcp_flags
* Add example of how to use tcp_flags
* Allow negative values to expires to unexpire a user
Fixes#20096
(cherry picked from commit 34f8080a19c09cd20ec9c045fca1e37ef74bb1e6)
(cherry picked from commit 54619f70f4b79f121c5062d54e9732d3cbb24377)
(cherry picked from commit 8c2fae27d6e2af810112032bb1dfef5459035b7e)
(cherry picked from commit db1a32f8caa8c8b9f989baa65784d4b2b5cad1f8)
* tweaked and normalized
- also added tests, made checking resilient
Using Ubuntu 14.04, test fails because 'blkid' < 2.21 doesn't recognize
'ocfs2' filesystem smaller than 108Mo:
6baa150398
filesystem: fix MKFS_FORCE_FLAGS for ocfs2
mkfs.ocfs2 -F won't work because mkfs.ocfs2 asks for a confirmation:
$ mkfs.ocfs2 -F img
mkfs.ocfs2 1.6.4
Cluster stack: classic o2cb
Overwriting existing ocfs2 partition.
WARNING: Cluster check disabled.
Proceed (y/N):
The undocumented 'x' switch must be used too.
add new line and update choice documentation
adding description for ocfs2 support
use correct variable ansible_distribution to test ocfs2 with Debian
distribution
use ansible_os_family for Debian
increase ocfs2 fs size to 20M (minimal size 11 instead of 10M)
add ocfs2 support for module filesystem
Update setup.yml
delete trailing spaces
add ocsfs2 defaut var
Install ocfs2-tools for all linux
Testing ocfs2 on for Ubuntu - restrict blkid to be be done
* configurable list of facts modules
- allow for args dict for specific modules
- add way to pass parameters
- avoid facts poluting test
- move to 'facts gathered' flag
- add 'gathering' setting tests
Matt Clay
Toshio Kuratomi
Jonathan Davila
Major Hayden
Sam Doran
Rohan Sadale
Matthew Krupcale
Daniel Jakots
Vlad Mencl
Susant Sahani
santascsi
Joseph Benden
Michael Scherer
Michael Scherer
Ferdinand Holzer
Isaac McDonald
Brian Coca
Protista
Dag Wieers
Christian Kotte
Alex Mayer
♫ Christian Krause ♫
Till Maas
Florian Apolloner
Ryan Brown
Matt Martz
Dmitrii Shuvar
Tom Matthews
Michael Mayorov
Andreas Calminder
Zhikang Zhang
Adam Miller
curry9999
Branko Majic
Pierre-Louis Bonicoli
hi117
Timo Sand
Jiri Tyr
Joren Vrancken
tomelrod
Gregory Hellings
uwila
Joe Abbey
Alexander Gubin
dgeo
Dennis Conrad
Chris Brown
Pilou
Jill R
James Cassell
Troy Murray
Shinichi TAMURA
Guillaume Grossetie
Brian Coca
Strahinja Kustudic
Sachidananda Urs
Antonio Huete Jimenez
Ken Evensen
Adrian Lopez
Artem Goncharov
bengerman
Luc
lchantre
Colin Nolan
Felix Kaechele
lu1as
Ed Schaller
Ikrom