* added Py2.4 and YAML Documentation fixes
* added no_log for password
* incorporated additional review comments
* remove type for options block
* fix type for pn_multiprotocol
The session keyword is no longer needed or supported in the load_config()
method for eos. This fixes an issue in eos_template where the session
keyword was still being sent.
* 'before' and 'after' are now only applied to 'lines'
* remove update argument
* update doc strings
* add path argument when performing config difference
* removes update argument
* adds `config` option to replace argument
* moves session management into shared module
* cleans up doc strings
* `before` and `after` args now only apply to lines
* fixes issue where configuration was not being loaded (#4704)
* fixes issue where defaults were not included when argument was set to True
tested on EOS 4.15.4F
When the configuration is compared and the results deserialized, the
dumps() function returns a string. This cohereces the return to a list
in case before and/or after needs to be applied
fixes 4707
* fixes save argument to be type bool
* now properly sets the changed returned flag based on diff
* updates docstring RETURNS to add backup_path
* removes unneeded state argument
tested on EOS 4.15.4F
Updates the junos_netconf module with changes to load the
NetworkModule instead of the get_module factory method. This
update is part of the 2.2 refactor of network modules
* adds src argument to load configuration from disk
* adds src_format to set the source file format
* adds update argument with choices merge or replace
* deprecates the replace argument in favor of update=replace
* commands argument now accepts a dict arguments
* rpcs argument now accepts a dict argument
* waitfor has been renamed to wait_for with an alias to waitfor
* only show commands are allowd when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
* adds support for default facts subset
* adds support for config facts subset
* maintain legacy facts from ops_facts pre-2.2
Tested on Openswitch 0.4.0
* add src argument to provide path to config file
* add new choice to match used to ignore current running config
* add update argument with choices merge or check
* add backup argument to backup current running config to control host
* add save argument to save current running config to startup config
* add state argument to control state of config file
* deprecated force argument, use match=none instead
Note: this module only supports transport=cli
Tested on OpenSwitch 0.4.0
* commands argument now accepts a dict arguments
* waitfor has been renamed to wait_for with an alias to waitfor
* only show commands are allowed when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
Tested on OpenSwitch 0.4.0
* add support for vrf configurations
* add support for configing the qos value for eapi
* add config argument to specify the device running-config
Tested on EOS 4.15.4F
IOS devices only support a single command output which is structured
text. This removes the ability to specify the command output format
when providing complex arguments to the commands
* key maps are now frozenset instead of dict objects
* FactsBase now includes utility functions for transforming json data structures
Tested on NXOS 7.3(0)D1(1)
* adds support for std network facts
* adds support for default facts subset
* adds support for config facts subset
* adds support for interface facts subset
* adds support for hardware facts subset
Tested on IOS-XR 6.0.0
* adds support for std network facts
* adds support for default facts subset
* adds support for config facts subset
* adds support for interface facts subset
* adds support for hardware facts subset
* maintains backwards capabilitity with 2.1 facts module
Tested on NXOS 7.3(0)D1(1)
* adds support for std network facts
* adds support for default facts subset
* adds support for config facts subset
* adds support for interface facts subset
* adds support for hardware facts subset
Tested on EOS 4.15.4F
* add src argument to provide path to config file
* add new choice to match used to ignore current running config
* add update argument with choices merge, replace or check
* add backup argument to backup current running config to control host
* add comment argument to provide comment to commit
* deprecated force argument, use match=none instead
* commands argument now accepts a dict arguments
* waitfor has been renamed to wait_for with an alias to waitfor
* only show commands are allowd when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
* commands argument now accepts a dict arguments[1]
* waitfor has been renamed to wait_for with an alias to waitfor
* only show commands are allowd when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
[1] The commands argument will now accept a dict argument that can
specifiy the output format of the command. To specify a dict argument
use the form of { command: <str>, output: <str>, prompt: <str>,
response: <str> }.
* arguments for vyos_config for 2.2 are now complete
* adds loading config file from disk (src argument)
* removes unsupported rollback argument
* changes update_config to update with options merge or check
* changes backup_config to backup
* add state argument for state of configuration file
* adds backup argument to backup current configuration
* adds save argument to control if active config is saved to disk
* adds comment argument for setting commit comment
* adds match argument to control configuraiton match
Tested with VyOS 1.7
* commands argument now accepts a dict arguments[1]
* waitfor has been renamed to wait_for with an alias to waitfor
* only show commands are allowd when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
[1] The commands argument will now accept a dict argument that can
specifiy the output format of the command. To specify a dict argument
use the form of { command: <str>, output: <str>, prompt: <str>,
response: <str> }. Command and output are required arguments. Output
accepts valid values text and json.
* add src argument to provide path to config file
* add new choice to match used to ignore current running config
* add update argument with choices merge, replace or check
* add backup argument to backup current running config to control host
* add defaults argument to control collection of config with or without defaults
* add save argument to save current running config to startup config
* add state argument to control state of config file
* deprecated force argument, use match=none instead
The CommandRunner will not allow duplicate commands to be added to the
command stack. This fix will now catch the exception and continue if
a duplicate command is attempting to be added to the runner instance.
* commands argument now accepts a dict arguments[1]
* waitfor has been renamed to wait_for with an alias to waitfor
* only show commands are allowd when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
[1] The commands argument will now accept a dict argument that can
specifiy the output format of the command. To specify a dict argument
use the form of { command: <str>, output: <str>, prompt: <str>,
response: <str> }. Command and output are required arguments. Output
accepts valid values text and json.
* add src argument to provide path to config file
* add new choice to match used to ignore current running config
* add update argument with choices merge or check
* add backup argument to backup current running config to control host
* add defaults argument to control collection of config with or without defaults
* add save argument to save current running config to startup config
* add state argument to control state of config file
* deprecated force argument, use match=none instead
* merge changes from ios shared module functions into ios_config.
* add src argument to provide path to config file
* add new choice to match used to ignore current running config
* add update argument with choices merge or check
* add backup argument to backup current running config to control host
* add defaults argument to control collection of config with or withoutdefaults
* add save argument to save current running config to startup config
* add state argument to control state of config file
* deprecated force argument, use match=none instead
* commands argument now accepts a dict arguments[1]
* waitfor has been renamed to wait_for with an alias to waitfor
* only show commands are allowd when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
[1] The commands argument will now accept a dict argument that can
specifiy the output format of the command. To specify a dict argument
use the form of { command: <str>, output: <str>, prompt: <str>,
response: <str> }. Command and output are required arguments. Output
accepts valid values text and json.
The module would raise a KeyError trying to find the save_config key
which is not present in the argument_spec. This was caused by the
check_args() function. Since the ios shared argument spec isn't used
the check_args function is not needed and has been removed.
This removes the get_module() factory function and directly creates
an instance of NetworkModule. This commit includes some minor clean
up to transition to the ios shared module for 2.2
* using check mode will now block all commands except show commands
* module will no longer allow config mode commands
* check args for unused values and issue warning
This refactors the ios_config module to use the network module added
in 2.2 to simplify common network functions
new features
* add src, dest arguments for working with config
* results now return flag if the config was saved or not
* adds append argument for updating the dest file (when dest is used)
* This adds support the CommandRunner to handle executing commands on
the remote device.
* It also changes the waitfor argument to wait_for to remain compatable
with other modules and adds an alias for waitfor.
* Restricts commands to show commands only when check mode is specified.
* add version_added to wait_for doc string
GGabriele
Senthil Kumar Ganesan
amitsi
John Barker
Peter Sprygada
Martin Matuška
Andrew Gaffney
Peter Sprygada
afunix
@skg_net
Michael Scherer
Timothy Appnel
Jason Edelman
Gary Rybak
codyrat
Roman
Alvaro Aleman
Nathaniel Case
Kevin Kirsche
Rob Phoenix
Stian Vikan
Brian Coca
Brian Coca